Browse by UCL Departments and Centres
Group by: Author | Type
Number of items: 50.
A
Abolfathi, A;
Waters, TP;
Brennan, MJ;
(2013)
On the performance of a nonlinear vibration isolator consisting of axially loaded curved beams.
In:
Proceedings of the 11th International Conference on Recent Advances in Structural Dynamics.
Institute of Sound and Vibration Research (ISVR): Pisa, Italy.
|
Ahmad, B;
Stoyanov, S;
Pelan, E;
Stride, E;
Edirisinghe, M;
(2013)
Electrospinning of ethyl cellulose fibres with glass and steel needle configurations.
Food Research International
, 54
(2)
1761 - 1772.
10.1016/j.foodres.2013.09.021.
|
Ashrafi Nik, M;
(2013)
Simulation of Spray Formation and Mixing in Diesel Engines with Novel Injector Designs.
Masters thesis (M.Phil), UCL (University College London).
|
B
Balusamy, S;
Dennis, J;
Hochgreb, S;
Scott, S;
Darabkhani, H;
Jurado, N;
Oakey, J;
... Sun, CG; + view all
(2013)
OxyCAP UK: Oxyfuel Combustion - Academic Programme for the UK.
Presented at: 3rd Oxyfuel Combustion Conference, Ponferrada, Spain.
|
Bohr, A;
(2013)
Investigation of the formulation, characteristics and performance of polymeric drug carrier particles intended for oral administration.
Doctoral thesis (PhD), UCL (University College London).
|
Bosi, F;
Mazzocchi, E;
Jatro, I;
Dal Corso, F;
Piccolroaz, A;
Deseri, L;
Bigoni, D;
... Odorizzi, S; + view all
(2013)
A Collaborative Project Between Industry and Academia to Enhance Engineering Education at Graduate and PhD Level in Ceramic Technology.
International Journal of Engineering Education
, 29
(6)
pp. 1362-1370.
|
Bradbeer, NIC;
(2013)
Implications for Underwater Shock Response of Adopting Simplified Structural Styles in Warships.
Doctoral thesis , UCL (University College London).
|
C
Cagney, N;
(2013)
Vortex-Induced Vibrations of a Cylinder in the Streamwise Direction.
Doctoral thesis , UCL (University College London).
|
Calleya, J;
Pawling, R;
Smith, T;
Greig, A;
(2013)
Feature 1: Green ships: Calibrating the future.
Naval Architect
, 01
pp. 34-39.
|
Christodoulou, I;
Tan, PJ;
(2013)
Crack initiation and fracture toughness of random Voronoi honeycombs.
ENGINEERING FRACTURE MECHANICS
, 104
140 - 161.
10.1016/j.engfracmech.2013.03.017.
|
D
Ding, Y;
Nikitichev, DI;
Krestnikov, IL;
Alhazime, A;
Rafailov, EU;
Fedorova, KA;
Krakowski, M;
(2013)
Broadly tunable quantum-dot based ultra-short pulse laser system with different diffraction grating orders.
Electronics Letters
, 49
(5)
364 - 366.
10.1049/el.2012.3761.
|
E
Ekemen, Z;
(2013)
Electrohydrodynamic Bubbling of Proteins for the Novel Fabrication of Porous Structures for Biomedical Engineering.
Doctoral thesis , UCL (University College London).
|
F
Fan, Z;
Castaings, M;
Lowe, MJS;
Biateau, C;
Fromme, P;
(2013)
Feature-guided waves for monitoring adhesive shear modulus in bonded stiffeners.
NDT & E INTERNATIONAL
, 54
96 - 102.
10.1016/j.ndteint.2012.12.006.
|
Fedorova, KA;
Sokolovskii, GS;
Nikitichev, DI;
Battle, PR;
Krestnikov, IL;
Livshits, DA;
Rafailov, EU;
(2013)
Orange-to-red tunable picosecond pulses by frequency doubling in a diode-pumped PPKTP waveguide.
Optics Letters
, 38
(15)
2835 - 2837.
10.1364/OL.38.002835.
|
Finlay, MC;
Xu, L;
Taggart, P;
Hanson, B;
Lambiase, PD;
(2013)
Bridging the gap between computation and clinical biology: validation of cable theory in humans.
Frontiers in Physiology: Cardiac Electrophysiology
, 4
, Article 213. 10.3389/fphys.2013.00213.
|
G
Ghanbar, H;
Luo, CJ;
Bakhshi, P;
Day, R;
Edirisinghe, M;
(2013)
Preparation of porous microsphere-scaffolds by electrohydrodynamic forming and thermally induced phase separation.
Mater Sci Eng C Mater Biol Appl
, 33
(5)
2488 - 2498.
10.1016/j.msec.2012.12.098.
|
Greig, AR;
Royal Academy of Engineering, .;
(2013)
Future Ship Powering Options: Exploring alternative methods of ship propulsion.
Royal Academy of Engineering: London, UK.
|
Griffiths, IM;
Howell, PD;
Shipley, RJ;
(2013)
Control and optimization of solute transport in a thin porous tube.
PHYSICS OF FLUIDS
, 25
(3)
, Article ARTN 033101. 10.1063/1.4795545.
|
H
Hellier, P;
Al-Haj, L;
Talibi, M;
Purton, S;
Ladommatos, N;
(2013)
Combustion and emissions characterization of terpenes with a view to their biological production in cyanobacteria.
FUEL
, 111
670 - 688.
10.1016/j.fuel.2013.04.042.
|
Hellier, P;
Ladommatos, N;
Allan, R;
Rogerson, J;
(2013)
Combustion and emissions characteristics of toluene/n-heptane and 1-octene/n-octane binary mixtures in a direct injection compression ignition engine.
Combustion and Flame
, 160
(10)
pp. 2141-2158.
10.1016/j.combustflame.2013.04.016.
|
Hellier, PR;
(2013)
The molecular structure of future fuels.
Doctoral thesis , UCL (University College London).
|
J
Jayasinghe, SN;
(2013)
Biomaterials and Bioengineering Tomorrow's Healthcare.
Biomatter
, 3
(3)
, Article e25887.
|
Jurado, N;
Darabkhani, HG;
Anthony, EJB;
Oakey, JE;
(2013)
Co-firing Performance of a Retrofitted Oxy-Combustor burning Coal/Biomass Blends: Experimental and Simulation Study.
Presented at: 3rd Oxyfuel Combustion Conference, Ponferrada, Spain.
|
Jurado, N;
Darabkhani, HG;
Anthony, EJB;
Oakey, JE;
(2013)
Kinetic Simulation of a 100kWth Oxy-Combustor using Aspen Plus.
Presented at: 12th Carbon Capture, Utilization & Sequestration Conference, Pittsburgh, PA, USA.
|
Jurado, N;
Darabkhani, HG;
Oakey, JE;
(2013)
Oxy-combustion of Coal/Biomass Mixtures in a 100kWth Combustor.
Presented at: 11th Annual Carbon Capture, Utilization and Sequestration Conference, Pittsburgh, PA, USA.
|
Jurado Pontes, N;
Darabkhani, H;
Oakey, J;
(2013)
Simulation of Oxy-combustion co-firing Coal and Biomass with ASU and Steam Turbine using Aspen Plus.
Presented at: Sixth International Conference on Clean Coal Technologies (CCT2013), Thessaloniki, Greece.
|
K
Kaul, H;
Cui, Z;
Ventikos, Y;
(2013)
A multi-paradigm modeling framework to simulate dynamic reciprocity in a bioreactor.
PLoS One
, 8
(3)
, Article e59671. 10.1371/journal.pone.0059671.
|
Kwon, KA;
Shipley, RJ;
Edirisinghe, M;
Ezra, DG;
Rose, G;
Best, SM;
Cameron, RE;
(2013)
High-speed camera characterization of voluntary eye blinking kinematics.
J R Soc Interface
, 10
(85)
, Article 20130227. 10.1098/rsif.2013.0227.
|
L
Labbaf, S;
Deb, S;
Cama, G;
Stride, E;
Edirisinghe, M;
(2013)
Preparation of multicompartment sub-micron particles using a triple-needle electrohydrodynamic device.
J Colloid Interface Sci
, 409
pp. 245-254.
10.1016/j.jcis.2013.07.033.
|
M
Mahalingam, S;
Edirisinghe, M;
(2013)
Forming of Polymer Nanofibers by a Pressurised Gyration Process.
Macromol Rapid Commun
, 34
(14)
pp. 1134-1139.
10.1002/marc.201300339.
|
Masserey, B;
Fromme, P;
(2013)
Fatigue crack growth monitoring using high-frequency guided waves.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL
, 12
(5-6)
484 - 493.
10.1177/1475921713498532.
|
Moeendarbary, E;
(2013)
Time-dependent mechanics of living cells.
Doctoral thesis , UCL (University College London).
|
Munir, GM;
(2013)
Surface patterning for biomedical applications via Template-assisted electrohydrodynamic atomisation.
Doctoral thesis , UCL (University College London).
|
N
Nasiri, R;
(2013)
Quantum Mechanical effects in n-alkane droplets.
In:
Proceedings, 25th Conference, ILASS.
ILASS
|
Newcombe, L;
Dewar, M;
Blunn, GW;
Fromme, P;
(2013)
Effect of amputation level on the stress transferred to the femur by an artificial limb directly attached to the bone.
Medical Engineering & Physics
, 35
(12)
pp. 1744-1753.
10.1016/j.medengphy.2013.07.007.
|
Nikitichev, DI;
Cataluna, M;
Fedorova, KA;
Ying, D;
Mikhrin, SS;
Krestnikov, IL;
Livshits, DA;
(2013)
High-Power Wavelength Bistability and Tunability in Passively Mode-Locked Quantum-Dot Laser.
IEEE Journal of Selected Topics in Quantum Electronics
, 19
(4)
, Article 1100907. 10.1109/JSTQE.2013.2239610.
|
P
Patel, P;
(2013)
Development of an Optical Facility for an Investigation into the Effect of Fuel Additives on Diesel Sprays.
Doctoral thesis (PhD), UCL (University College London).
|
Pearson, NC;
Shipley, RJ;
Waters, SL;
Oliver, JM;
(2013)
Multiphase modelling of the influence of fluid flow and chemical concentration on tissue growth in a hollow fibre membrane bioreactor.
Mathematical Medicine and Biology
, 31
(4)
pp. 393-430.
10.1093/imammb/dqt015.
|
Piperakis, AS;
(2013)
An Integrated Approach to Naval Ship Survivability in Preliminary Ship Design.
Doctoral thesis , UCL (University College London).
|
R
Reardon, PJT;
Handoko, AD;
Li, L;
Huang, J;
Tang, J;
(2013)
Dimensionally and compositionally controlled growth of calcium phosphate nanowires for bone tissue regeneration.
JOURNAL OF MATERIALS CHEMISTRY B
, 1
(44)
6170 - 6176.
10.1039/c3tb21073a.
|
S
Sebbowa, TM;
(2013)
Surface Modification of a Titanium Alloy via Electrospraying for Biomedical Engineering Applications.
Doctoral thesis (PhD), UCL (University College London).
|
Semenov, YA;
Wu, GX;
Oliver, JM;
(2013)
Splash jet generated by collision of two liquid wedges.
Journal of Fluid Mechanics
, 737
pp. 132-145.
10.1017/jfm.2013.529.
|
Semenov, YA;
Wu, GX;
Yoon, BS;
(2013)
Collision of two liquid wedges.
In: Molin, B and Kimmoun, O and Remy, F, (eds.)
Proceedings: 28th International Workshop on Water Waves and Floating Bodies.
International Workshop on Water Waves and Floating Bodies (IWWWFB): Marseille, France.
|
Sherwood, JM;
(2013)
Blood velocity and viscosity in bifurcating microchannels.
Doctoral thesis (PhD), UCL (University College London).
|
Suarez de la Fuente, S;
Greig, A;
Balachandran, R;
(2013)
Waste Heat Recovery Systems: Reducing Shipping Carbon Emissions under Real Operative Conditions.
Presented at: UCL Mechanical Engineering PhD Students Conference, London, UK.
|
V
Vardakis, JC;
Tully, BJ;
Ventikos, Y;
(2013)
Exploring the Efficacy of Endoscopic Ventriculostomy for Hydrocephalus Treatment via a Multicompartmental Poroelastic Model of CSF Transport: A Computational Perspective.
PLoS ONE
, 8
(12)
, Article e84577. 10.1371/journal.pone.0084577.
|
W
Williams, DP;
Shipley, R;
Ellis, MJ;
Webb, S;
Ward, J;
Gardner, I;
Creton, S;
(2013)
Novel in vitro and mathematical models for the prediction of chemical toxicity.
Toxicology Research
, 2
(1)
pp. 40-59.
10.1039/c2tx20031g.
|
X
Xu, G;
(2013)
Numerical simulation of two-dimensional vortex shedding for marine applications.
Doctoral thesis (PhD), UCL (University College London).
|
Y
Yuan, Y;
Tan, PJ;
(2013)
Deformation and failure of rectangular plates subjected to impulsive loadings.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
, 59
46 - 59.
10.1016/j.ijimpeng.2013.03.009.
|
Yuan, Y;
Tan, PJ;
(2013)
Energy and momentum transfer to a 'fully-clamped' elastic plate in an air-blast.
Journal of Physics: Conference Series
, 451
(1)
, Article 012017. 10.1088/1742-6596/451/1/012017.
|