Atkins, C;
Feldman, C;
Brooks, D;
Watson, S;
Cochrane, W;
Roulet, M;
Hugot, E;
... Perrin, F; + view all
(2018)
Topological Design of Lightweight Additively Manufactured Mirrors for Space.
In:
Proceedings of SPIE Astronomical Telescopes + Instrumentation 2018.
SPIE: Austin, Texas, USA.
Preview |
Text
107060I.pdf - Published Version Download (2MB) | Preview |
Abstract
Additive manufacturing (AM), more commonly known as 3D printing, is a commercially established technology for rapid prototyping and fabrication of bespoke intricate parts. To date, research quality mirror prototypes are being trialled using additive manufacturing, where a high quality reective surface is created in a post-processing step. One advantage of additive manufacturing for mirror fabrication is the ease to lightweight the structure: The design is no longer confined by traditional machining (mill, drill and lathe) and optimised/innovative structures can be used. The end applications of lightweight AM mirrors are broad; the motivation behind this research is low mass mirrors for space-based astronomical or Earth Observation imaging. An example of a potential application could be within nano-satellites, where volume and mass limits are critical. The research presented in this paper highlights the early stage experimental development in AM mirrors and the future innovative designs which could be applied using AM. The surface roughness on a diamond-turned AM aluminium (AlSi10Mg) mirror is presented which demonstrates the ability to achieve an average roughness of 3.6nm root mean square (RMS) measured over a 3 3 grid. A Fourier transform of the roughness data is shown which deconvolves the roughness into contributions from the diamond-turning tooling and the AM build layers. In addition, two nickel phosphorus (NiP) coated AlSi10Mg AM mirrors are compared in terms of surface form error; one mirror has a generic sandwich lightweight design at 44% the mass of a solid equivalent, prior to coating and the second mirror was lightweighted further using the finite element analysis tool topology optimisation. The surface form error indicates an improvement in peak-to-valley (PV) from 323nm to 204nm and in RMS from 83nm to 31nm for the generic and optimised lightweighting respectively while demonstrating a weight reduction between the samples of 18%. The paper concludes with a discussion of the breadth of AM design that could be applied to mirror lightweighting in the future, in particular, topology optimisation, tessellating polyhedrons and Voronoi cells are presented.
| Type: | Proceedings paper |
|---|---|
| Title: | Topological Design of Lightweight Additively Manufactured Mirrors for Space |
| Event: | SPIE Astronomical Telescopes + Instrumentation, 2018 |
| ISBN-13: | 9781510619654 |
| Open access status: | An open access version is available from UCL Discovery |
| DOI: | 10.1117/12.2313353 |
| Publisher version: | https://doi.org/10.1117/12.2313353 |
| Language: | English |
| Additional information: | This version is the version of record. For information on re-use, please refer to the publisher’s terms and conditions. |
| Keywords: | Additive manufacturing, 3D printing, mirror fabrication, surface roughness, lightweighting design, topology optimisation |
| UCL classification: | UCL UCL > Provost and Vice Provost Offices > UCL BEAMS UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Maths and Physical Sciences UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Maths and Physical Sciences > Dept of Physics and Astronomy |
| URI: | https://discovery.ucl.ac.uk/id/eprint/10060429 |
Archive Staff Only
 |
View Item |
