Waqar, N; Wong, KK; Chae, CB; Murch, R; (2025) Turbocharging Fluid Antenna Multiple Access. IEEE Transactions on Wireless Communications pp. 1-15. 10.1109/TWC.2025.3607824. (In press).

Preview

Text Wong_Turbocharging Fluid Antenna Multiple Access_AAM.pdf Download (7MB) | Preview

Abstract

Based on our current understanding, extreme massive access over the same physical channel is only possible if an extra-large multiple-input multiple-output (XL-MIMO) antenna is used at the base station (BS) and instantaneous channel state information (CSI) is known at the BS side for precoding design. This casts doubt on scalability and challenges in device-to-device situations in which there is not a centralized, optimized BS for transmitting the user signals. To address this problem, we revisit the massive connectivity challenge by considering the case where no CSI is available at the BS and no precoding is used. In this situation, inter-user interference (IUI) mitigation can only be performed at the user terminal (UT) side. Leveraging the position flexibility of fluid antenna system (FAS), we adopt a fluid antenna multiple access (FAMA) approach that exploits the interference signal fluctuation in the spatial domain. Specifically, we assume that we have N spatially correlated received signals per symbol duration from FAS. Our main approach uses a simple heuristic port shortlisting method that identifies promising ports to obtain favourable received signals that can be combined via maximum ratio combining (MRC) to form the received output signal for final detection. On top of this, a pre-trained deep joint source-channel coding (JSCC) scheme is employed, which together with a diffusion-based denoising model (MixDDPM) at the UT side, can improve the IUI immunity. We refer to the proposed scheme as turbo FAMA. Simulation results show that with a physical FAS size of 20 wavelengths at each UT transmitting quaternary phase shift keying (QPSK) symbols, fast FAMA can support 50 users while turbo FAMA can handle up to 200 users if the required symbol error rate (SER) is 10-2. If a higher error tolerance is acceptable, say SER at 0.1, turbo FAMA can even serve up to 1000 users but fast FAMA is only able to handle 160 users, all remarkably achieved without CSI at the BS.

Download activity - last month

Export as XMLCSVJSON

Download activity - last 12 months

Export as JSONXMLCSV

Downloads by country - last 12 months

Export as XMLCSVJSON

Archive Staff Only

View Item