UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

Effects of de-fluorination on hydrophobicity and on CO₂ and CH₄ adsorption under high humidity in MeMOFs, methylated analogues of FMOFs

Yasmeen, R; Islam, SMS; Ayeni, OM; Moghadam, PZ; Du, J; Omary, MA; (2025) Effects of de-fluorination on hydrophobicity and on CO₂ and CH₄ adsorption under high humidity in MeMOFs, methylated analogues of FMOFs. Dalton Transactions , 54 (19) pp. 7641-7658. 10.1039/d5dt00242g.

[thumbnail of Moghadam_CLEAN-MS_DT-ART-01-2025-000242.R2.pdf] Text
Moghadam_CLEAN-MS_DT-ART-01-2025-000242.R2.pdf - Accepted Version
Access restricted to UCL open access staff until 18 March 2026.

Download (4MB)

Abstract

Herein, we report carbon dioxide (CO2) and methane (CH4) adsorption behavior in MeMOFs, methylated analogues of FMOFs with −CF3 groups replaced with −CH3, utilizing grand canonical Monte Carlo (GCMC) simulations at 288, 298, and 308 K and P ≤ 40 bar and density functional theory (DFT) computations of adsorption energies. Isosteric heats of adsorption (Qst), Henry's constants (KH) and interaction energies were used to analyze the adsorbate-adsorbent interaction strengths and gas uptake of guest molecules. The Qst of CO2 was found to be 1.29-1.73 times higher in MeMOF-1 than in FMOF-1, vs. 1.30-1.47 times for CH4, hence demonstrating higher guest affinity to MeMOF-1 than to the FMOF-1 polymorph. Simulated isotherms were further fitted with Langmuir, Langmuir-Freundlich, and Tóth models to calculate the isosteric heat of adsorption at infinite dilution (Qst0) using the Clausius-Clapeyron equation. The data were then compared with those obtained from force-field-based Monte Carlo (MC) simulations to determine the consistency. The Tóth model presented excellent characterization of CO2 and CH4 adsorption, implying both FMOF-1 and MeMOF-1 materials have inhomogeneous surfaces. The order of the Qst0 values obtained using the Clausius-Clapeyron equation was consistent with that obtained from MC simulations and confirmed the higher uptake of CO2 and CH4 in MeMOF-1 as predicted by GCMC. The presence of H2O vapor, up to 80% relative humidity, did not affect the CO2 and CH4 adsorption in MeMOF-1 structures, as was observed in the analogous FMOF-1 parent structure. The larger pore size and surface area upon substituting −CF3 groups with −CH3 groups allow for significantly greater CO2 and CH4 uptake in MeMOFs compared to FMOFs with no water uptake even at high humidity. These simulations were applied upon MeMOF analogues of multiple FMOF-1 polymorphs known to date and are thus expected to hold for MeMOF analogues of other FMOF and MOFF structures reported by the Omary and Miljanić teams, respectively. Experimental data have validated the superhydrophobic nature of the MeMOF-1 composition via a polymorphic form with a different topology, MeMOF-2, attaining an ∼100° increase in water-drop contact angles, from ∼74° for a control plastic substrate to ∼172° upon dry-coating it with MeMOF-2. Experimentally synthesized MeMOF-2 possesses the same {Ag(3,5-(CH3)2-1,2,4-triazolate)} empirical formula as that of simulated MeMOF-1 structures, albeit with a different crystal structure and lower porosity.

Type: Article
Title: Effects of de-fluorination on hydrophobicity and on CO₂ and CH₄ adsorption under high humidity in MeMOFs, methylated analogues of FMOFs
Location: England
DOI: 10.1039/d5dt00242g
Publisher version: https://doi.org/10.1039/d5dt00242g
Language: English
Additional information: This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions.
UCL classification: UCL
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Chemical Engineering
URI: https://discovery.ucl.ac.uk/id/eprint/10208889
Downloads since deposit
0Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item