Shi, J;
Abad, SA;
Shi, G;
Gaozhang, W;
Dai, JS;
Wurdemann, HA;
(2025)
Model-Based Static Compliance Analysis and Control for Pneumatic-Driven Soft Robots.
IEEE/ASME Transactions on Mechatronics
10.1109/TMECH.2025.3553387.
(In press).
Preview |
PDF
Model-Based_Static_Compliance_Analysis_and_Control_for_Pneumatic-Driven_Soft_Robots.pdf - Accepted Version Download (4MB) | Preview |
Abstract
Elastomer-based soft manipulators have been explored in various fields due to their inherent compliant properties. Understanding and regulation of robot's compliance are important to the design, modeling, and control of soft robots. However, the elastomers are nonlinear hyperelastic materials with distributed compliance. This property makes the compliance modeling and control of soft robots fundamentally different and more complex from their rigid counterparts. This article presents a neo-Hookean model-based compliance modeling and control approach to investigate and regulate the configuration-dependent compliance property of a pneumatic-driven soft manipulator. The neo-Hookean model is used to derive the stretch ratio and update the tangent modulus of materials. The robot's compliance is obtained by integration with the forward kinematics building on the static Cosserat rod model. The derived compliance matrix is utilized to regulate robot's compliance along the x-, y-, and z-axes. Computational and experimental validation demonstrate high fidelity of the proposed approach. Moreover, experiments illustrate that the exhibited robot's compliance can be regulated up to 49.5% higher or 34.2% lower compared to inherent robot's compliance. The proposed model-based compliance control strategy has also demonstrated its effectiveness in enhancing grasping ability when implemented on a soft gripper.
| Type: | Article |
|---|---|
| Title: | Model-Based Static Compliance Analysis and Control for Pneumatic-Driven Soft Robots |
| Open access status: | An open access version is available from UCL Discovery |
| DOI: | 10.1109/TMECH.2025.3553387 |
| Publisher version: | https://doi.org/10.1109/TMECH.2025.3553387 |
| Language: | English |
| Additional information: | This version is the author accepted manuscript. For information on re-use, please refer to the publisher's terms and conditions. - For the purpose of open access, the author has applied a Creative Commons Attribution (CC BY) license to any author accepted manuscript version arising. In addition, interested readers can request the code from the corresponding author. |
| UCL classification: | UCL UCL > Provost and Vice Provost Offices > UCL BEAMS UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Chemical Engineering UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Mechanical Engineering |
| URI: | https://discovery.ucl.ac.uk/id/eprint/10207919 |
Archive Staff Only
 |
View Item |
