UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

A comprehensive comparative study on methylene blue removal from aqueous solution using biochars produced from rapeseed, whitewood, and seaweed via different thermal conversion technologies

Guelec, Fatih; Williams, Orla; Kostas, Emily T; Samson, Abby; Stevens, Lee A; Lester, Edward; (2022) A comprehensive comparative study on methylene blue removal from aqueous solution using biochars produced from rapeseed, whitewood, and seaweed via different thermal conversion technologies. Fuel , 330 , Article 125428. 10.1016/j.fuel.2022.125428. Green open access

[thumbnail of 1-s2.0-S001623612202261X-main.pdf]
Preview
Text
1-s2.0-S001623612202261X-main.pdf - Published Version

Download (3MB) | Preview

Abstract

This paper presents, for the first time, a comprehensive comparative analysis of the potential of using biochars from three distinctly different UK-sourced biomass feedstocks, produced via three different thermal processing techniques, to adsorb methylene blue dye. Biochars were made from rapeseed, whitewood, and seaweed (Laminaria Digitata), produced via hydrothermal conversion, pyrolysis, and torrefaction. Adsorption kinetic models were developed for each biochar at different temperatures, pH and initial dye concentrations. Relatively high levels of methylene blue adsorption capacity were achieved by seaweed-based biochars (∼150 mg/g), with reasonable levels for rapeseed-based biochars (∼60 mg/g), whilst adsorption levels were found to be relatively low for whitewood-based biochars (<30 mg/g). A Pseudo-second-order kinetic model provided the best fit with experimental results. The Langmuir adsorption isotherm showed a better fit for seaweed biochars, while the Freundlich adsorption isotherm was a better fit for the rapeseed-based biochars. The Langmuir adsorption isotherms showed relatively high maximum adsorption capacity (Qo) for seaweed-based biochars; ∼175 mg/g for seaweed-Torrefaction and ∼ 117 mg/g for seaweed-Pyrolysis. Negative Gibbs free energy (ΔG°) values were observed for the seaweed-Torrefaction < seaweed-Pyrolysis < 0, which indicates that the methylene blue removal could be a thermodynamically favourable process due to the spontaneous nature of the adsorption. Our investigation has shown that the removal of methylene blue from wastewater could be a potential application for seaweed-based biochars as part of a holistic whole life cycle valorisation pathway. However, it is not suitable for all types of biomasses which emphasises the need for tailoring unique valorisation pathways for different types of biomasses.

Type: Article
Title: A comprehensive comparative study on methylene blue removal from aqueous solution using biochars produced from rapeseed, whitewood, and seaweed via different thermal conversion technologies
Open access status: An open access version is available from UCL Discovery
DOI: 10.1016/j.fuel.2022.125428
Publisher version: https://doi.org/10.1016/j.fuel.2022.125428
Language: English
Additional information: © 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
Keywords: Biochar, Hydrothermal conversion, Pyrolysis, Torrefaction, Wastewater treatment Methylene blue, Adsorption
UCL classification: UCL
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Biochemical Engineering
URI: https://discovery.ucl.ac.uk/id/eprint/10190515
Downloads since deposit
8Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item