Fotopoulos, Vasileios;
O'Hern, Corey S;
Shattuck, Mark D;
Shluger, Alexander L;
(2024)
Modeling the Effects of Varying the Ti Concentration on the Mechanical Properties of Cu–Ti Alloys.
ACS Omega
, 9
(9)
pp. 10286-10298.
10.1021/acsomega.3c07561.
Preview |
Text
fotopoulos-et-al-2024-modeling-the-effects-of-varying-the-ti-concentration-on-the-mechanical-properties-of-cu-ti-alloys.pdf - Published Version Download (3MB) | Preview |
Abstract
The mechanical properties of CuTi alloys have been characterized extensively through experimental studies. However, a detailed understanding of why the strength of Cu increases after a small fraction of Ti atoms are added to the alloy is still missing. In this work, we address this question using density functional theory (DFT) and molecular dynamics (MD) simulations with the modified embedded atom method (MEAM) interatomic potentials. First, we performed calculations of the uniaxial tension deformations of small bicrystalline Cu cells using DFT static simulations. We then carried out uniaxial tension deformations on much larger bicrystalline and polycrystalline Cu cells by using MEAM MD simulations. In bicrystalline Cu, the inclusion of Ti increases the grain boundary separation energy and the maximum tensile stress. The DFT calculations demonstrate that the increase in the tensile stress can be attributed to an increase in the local charge density arising from Ti. MEAM simulations in larger bicrystalline systems have shown that increasing the Ti concentration decreases the density of the stacking faults. This observation is enhanced in polycrystalline Cu, where the addition of Ti atoms, even at concentrations as low as 1.5 atomic (at.) %, increases the yield strength and elastic modulus of the material compared to pure Cu. Under uniaxial tensile loading, the addition of small amounts of Ti hinders the formation of partial Shockley dislocations in the grain boundaries of Cu, leading to a reduced level of local deformation. These results shed light on the role of Ti in determining the mechanical properties of polycrystalline Cu and enable the engineering of grain boundaries and the inclusion of Ti to improve degradation resistance.
| Type: | Article |
|---|---|
| Title: | Modeling the Effects of Varying the Ti Concentration on the Mechanical Properties of Cu–Ti Alloys |
| Open access status: | An open access version is available from UCL Discovery |
| DOI: | 10.1021/acsomega.3c07561 |
| Publisher version: | http://dx.doi.org/10.1021/acsomega.3c07561 |
| Language: | English |
| Additional information: | © 2024 The Authors. Published by American Chemical Society. This publication is licensed under CC-BY 4.0 (https://creativecommons.org/licenses/by/4.0/). |
| Keywords: | Alloys, Deformation, DFT calculations, Energy, Stress |
| UCL classification: | UCL UCL > Provost and Vice Provost Offices > UCL BEAMS UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Maths and Physical Sciences UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Maths and Physical Sciences > Dept of Physics and Astronomy |
| URI: | https://discovery.ucl.ac.uk/id/eprint/10189198 |
Archive Staff Only
 |
View Item |
