Ishfaq, Kashif; Sana, Muhammad; Waseem, Muhammad Umair; Ashraf, Waqar Muhammad; Anwar, Saqib; Krzywanski, Jaroslaw; (2023) Enhancing EDM Machining Precision through Deep Cryogenically Treated Electrodes and ANN Modelling Approach. Micromachines , 14 (8) , Article 1536. 10.3390/mi14081536.

Preview

Text micromachines-14-01536-v2.pdf - Published Version Download (18MB) | Preview

Abstract

The critical applications of difficult-to-machine Inconel 617 (IN617) compel the process to be accurate enough that the requirement of tight tolerances can be met. Electric discharge machining (EDM) is commonly engaged in its machining. However, the intrinsic issue of over/undercut in EDM complicates the achievement of accurately machined profiles. Therefore, the proficiency of deep cryogenically treated (DCT) copper (Cu) and brass electrodes under modified dielectrics has been thoroughly investigated to address the issue. A complete factorial design was implemented to machine a 300 μm deep impression on IN617. The machining ability of DCT electrodes averagely gave better dimensional accuracy as compared to non-DCT electrodes by 13.5% in various modified dielectric mediums. The performance of DCT brass is 29.7% better overall compared to the average value of overcut (OC) given by DCT electrodes. Among the non-treated (NT) electrodes, the performance of Cu stands out when employing a Kerosene-Span-20 modified dielectric. In comparison to Kerosene-Tween-80, the value of OC is 33.3% less if Kerosene-Span-20 is used as a dielectric against the aforementioned NT electrode. Finally, OC’s nonlinear and complex phenomena are effectively modeled by an artificial neural network (ANN) with good prediction accuracy, thereby eliminating the need for experiments.

Download activity - last month

Export as XMLCSVJSON

Download activity - last 12 months

Export as JSONXMLCSV

Downloads by country - last 12 months

Export as CSVXMLJSON

Archive Staff Only

View Item