UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

Acetone-Gasoline Blend as an Alternative Fuel in SI Engines: A Novel Comparison of Performance, Emission, and Lube Oil Degradation

Usman, M; Khan, T; Riaz, F; Ijaz Malik, MA; Amjad, MT; Shah, MH; Ashraf, WM; ... Nowak, W; + view all (2022) Acetone-Gasoline Blend as an Alternative Fuel in SI Engines: A Novel Comparison of Performance, Emission, and Lube Oil Degradation. ACS Omega , 8 (12) pp. 11267-11280. 10.1021/acsomega.2c08271. Green open access

[thumbnail of Ashraf_acsomega.2c08271.pdf]
Preview
Text
Ashraf_acsomega.2c08271.pdf

Download (7MB) | Preview

Abstract

The disproportionate use of petroleum products and stringent exhaust emissions has emphasized the need for alternative green fuels. Although several studies have been conducted to ascertain the performance of acetone-gasoline blends in spark-ignition (SI) engines, limited work has been done to determine the influence of fuel on lubricant oil deterioration. The current study fills the gap through lubricant oil testing by running the engine for 120 h on pure gasoline (G) and gasoline with 10% by volume acetone (A10). Compared to gasoline, A10 produced better results in 11.74 and 12.05% higher brake power (BP) and brake thermal efficiency (BTE), respectively, at a 6.72% lower brake-specific fuel consumption (BSFC). The blended fuel A10 produced 56.54, 33.67, and 50% lower CO, CO2, and HC emissions. However, gasoline remained competitive due to lower oil deterioration than A10. The flash-point and kinematic viscosity, compared to fresh oil, decreased by 19.63 and 27.43% for G and 15.73 and 20.57% for A10, respectively. Similarly, G and A10 showed a decrease in total base number (TBN) by 17.98 and 31.46%, respectively. However, A10 is more detrimental to lubricating oil due to a 12, 5, 15, and 30% increase in metallic particles like aluminum, chromium, copper, and iron, respectively, compared to fresh oil. Performance additives like calcium and phosphorous in lubricant oil for A10 decreased by 10.04 and 4.04% in comparison to gasoline, respectively. The concentration of zinc was found to be 18.78% higher in A10 when compared with gasoline. A higher proportion of water molecules and metal particles were found in lubricant oil for A10.

Type: Article
Title: Acetone-Gasoline Blend as an Alternative Fuel in SI Engines: A Novel Comparison of Performance, Emission, and Lube Oil Degradation
Open access status: An open access version is available from UCL Discovery
DOI: 10.1021/acsomega.2c08271
Publisher version: https://doi.org/10.1021/acsomega.2c08271
Language: English
Additional information: Copyright © 2023 The Authors. Published by American Chemical Society This is an open access article under the CC BY 4.0 license Attribution 4.0 International (https://creativecommons.org/licenses/by/4.0/)
Keywords: Fossil fuels,Ketones,Lipids,Oxides,Redox reactions
UCL classification: UCL
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Chemical Engineering
URI: https://discovery.ucl.ac.uk/id/eprint/10167337
Downloads since deposit
Loading...
92Downloads
Download activity - last month
Loading...
Download activity - last 12 months
Loading...
Downloads by country - last 12 months
Loading...

Archive Staff Only

View Item View Item