UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

A spherical joint robotic end-effector for the Expanded Endoscopic Endonasal Approach

Dimitrakakis, E; Dwyer, G; Lindenroth, L; Giataganas, P; Dorward, NL; Marcus, HJ; Stoyanov, D; (2021) A spherical joint robotic end-effector for the Expanded Endoscopic Endonasal Approach. Journal of Medical Robotics Research , 5 (3&4) , Article 2150002. 10.1142/s2424905x21500021. Green open access

[thumbnail of Dimitrakakis_et_al_JMRR2020_final.pdf]
Preview
Text
Dimitrakakis_et_al_JMRR2020_final.pdf - Accepted Version

Download (5MB) | Preview

Abstract

The endonasal transsphenoidal approach allows surgeons to access the pituitary gland through the natural orifice of the nose. Recently, surgeons have also described an Expanded Endoscopic Endonasal Approach (EEEA) for the treatment of other tumours around the base of the brain. However, operating in this way with nonarticulated tools is technically very difficult and not widely adopted. The goal of this study is to develop an articulated end-effector for a novel handheld robotic tool for the EEEA. We present a design and implementation of a 3.6mm diameter, three degrees-of-freedom, tendon-driven robotic end-effector that, contrary to rigid instruments which operate under fulcrum, will give the surgeon the ability to reach areas on the surface of the brain that were previously inaccessible. We model the end-effector kinematics in simulation to study the theoretical workspace it can achieve prior to implementing a test-bench device to validate the efficacy of the end-effector. We find promising repeatability of the proposed robotic end-effector of 0.42mm with an effective workspace with limits of ±30∘, which is greater than conventional neurosurgical tools. Additionally, although the tool’s end-effector has a small enough diameter to operate through the narrow nasal access path and the constrained workspace of EEEA, it showcased promising structural integrity and was able to support approximately a 6N load, despite a large deflection angle the limiting of which is scope of future work. These preliminary results indicate the end-effector is a promising first step towards developing appropriate handheld robotic instrumentation to drive EEEA adoption.

Type: Article
Title: A spherical joint robotic end-effector for the Expanded Endoscopic Endonasal Approach
Open access status: An open access version is available from UCL Discovery
DOI: 10.1142/s2424905x21500021
Publisher version: https://doi.org/10.1142/S2424905X21500021
Language: English
Additional information: This version is the author accepted manuscript. For information on re-use, please refer to the publisher's terms and conditions.
UCL classification: UCL
UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences
UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences > Faculty of Brain Sciences
UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences > Faculty of Brain Sciences > UCL Queen Square Institute of Neurology
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Computer Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Med Phys and Biomedical Eng
URI: https://discovery.ucl.ac.uk/id/eprint/10121198
Downloads since deposit
240Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item