Zhang, X;
Baudet, BA;
Yao, T;
(2020)
The influence of particle shape and mineralogy on the particle strength, breakage and compressibility.
International Journal of Geo-Engineering
, 11
, Article 1. 10.1186/s40703-020-0108-4.
Preview |
Text
Zhang2020_Article_TheInfluenceOfParticleShapeAnd.pdf - Published Version Download (1MB) | Preview |
Abstract
It is widely accepted that both particle shape and mineralogy could have a great effect on the particle strength. However, due to the complexity of nature grains, it is difficult to distinguish the influence of particle shape from mineralogy. This paper shows measurements of the particle shape and mineralogy of carbonate sand, completely decomposed granite, Leighton Buzzard sand and pumice sand. The particle shape of carbonate sand and completely decomposed granite is similar, but the mineral of carbonate sand is carbon dioxide while the mineral of completely decomposed granite is mica and feldspar. It is found that the single particle strength of completely decomposed granite is higher than that of carbonate sand, and the particle breakage caused by one-dimensional compressing tests of completely decomposed granite is higher than that of carbonate sand. The mineralogy of both completely decomposed granite and Leighton Buzzard sand are quartz, but completely decomposed granite is more heterogeneous, result in the single particle strength of completely decomposed granite is much lower than that of Leighton Buzzard sand. It is also found the particle breakage from the one-dimensional compression test for completely decomposed is larger than Leighton Buzzard sand. It should be noted that carbonate sand is stronger than completely decomposed granite after quantitatively analysis the particle shape, particle breakage and compressibility behavior although carbonate sand has extremely irregular shape such as a branch shape, and also several pores. On the other hand, although Leighton Buzzard sand, completely decomposed granite and also pumice sand to some extent have composition of silica, the crystal of those three is completely different, result in the strength or compressibility are quite different. It seems that particle shape is not a major factor to affect strength or compressibility, but the mineralogy could be a major factor.
Type: | Article |
---|---|
Title: | The influence of particle shape and mineralogy on the particle strength, breakage and compressibility |
Open access status: | An open access version is available from UCL Discovery |
DOI: | 10.1186/s40703-020-0108-4 |
Publisher version: | https://doi.org/10.1186/s40703-020-0108-4 |
Language: | English |
Additional information: | This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. |
Keywords: | Particle shap, Single particle crushing strength, Breakage, Compressibility, Mineralogy |
UCL classification: | UCL UCL > Provost and Vice Provost Offices > UCL BEAMS UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Civil, Environ and Geomatic Eng |
URI: | https://discovery.ucl.ac.uk/id/eprint/10092120 |



1. | ![]() | 1 |
2. | ![]() | 1 |
Archive Staff Only
![]() |
View Item |