UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

Biomimetic surface functionalization of clinically relevant metals used as orthopaedic and dental implants

García-Gareta, E; Hua, J; Orera, A; Kohli, N; Knowles, JC; Blunn, GW; (2017) Biomimetic surface functionalization of clinically relevant metals used as orthopaedic and dental implants. Biomedical Materials , 13 (1) , Article 015008. 10.1088/1748-605X/aa87e6. Green open access

[thumbnail of García-Gareta+et+al_2017_Biomed._Mater._10.1088_1748-605X_aa87e6.pdf]
Preview
Text
García-Gareta+et+al_2017_Biomed._Mater._10.1088_1748-605X_aa87e6.pdf - Accepted Version

Download (8MB) | Preview

Abstract

Titanium and its alloys or tantalum (Ta) are materials used in orthopaedic and dental implants due to their excellent mechanical properties and biocompatibility. However, their bioactivity and osteoconductivity is low. With a view to improving these materials bioactivity we hypothesised that the surface of Ta and TiAl6V4 can be functionalised with biomimetic, amorphous nano-sized calcium-phosphate (CaP) apatite-like deposits, instead of creating uniform coatings, which can lead to flaking, delamination and poor adherence. We used Ta and TiAl6V4 metal discs with smooth and rough surfaces. Amorphous CaP apatite-like particles were deposited on the different surfaces by a biomimetic rapid two-step soaking method using concentrated simulated body fluid (SBF) solutions without a pre-treatment of the metal surfaces to induce CaP deposition. Immersion times in the second SBF solution of 48 h and 18 h for Ta and TiAl6V4 respectively produced CaP deposits composed of amorphous globular nano-sized particles that also contained Mg, C and O. Longer immersion times produced more uniform coatings as well as an undesired calcite mineral phase. Prediction of in vivo behaviour by immersion in regular SBF showed that the obtained CaP deposits would act as a catalyst to rapidly form a Ca deficient CaP layer that also incorporates Mg. The amorphous CaP apatite-like deposits promoted initial attachment, proliferation and osteogenic differentiation of bone marrow derived mesenchymal stem cells. Finally, we used our method to functionalise 3D porous structures of titanium alloy made by selective laser sintering. Our study uses a novel and cost-effective approach to functionalise clinically relevant metal surfaces in order to increase the bioactivity of these materials, which could improve their clinical performance.

Type: Article
Title: Biomimetic surface functionalization of clinically relevant metals used as orthopaedic and dental implants
Location: England
Open access status: An open access version is available from UCL Discovery
DOI: 10.1088/1748-605X/aa87e6
Publisher version: http://doi.org/10.1088/1748-605X/aa87e6
Language: English
Additional information: © 2017 IOP Publishing Ltd. This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions.
Keywords: TiAl6V4, biomimetic, calcium-phosphate, functionalisation, metals, tantalum
UCL classification: UCL
UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences
UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences > Faculty of Medical Sciences
UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences > Faculty of Medical Sciences > Eastman Dental Institute
UCL > Provost and Vice Provost Offices > School of Life and Medical Sciences > Faculty of Medical Sciences > Eastman Dental Institute > Biomaterials and Tissue Eng
URI: https://discovery.ucl.ac.uk/id/eprint/1571191
Downloads since deposit
240Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item