Benlachtar, Y.; (2006) Advanced performance monitoring in all-optical networks. Doctoral thesis , University of London.

PDF U591843.pdf Download (27MB)

Abstract

This thesis investigates advanced optical performance monitoring approaches for future all-optical networks using the synchronous sampling technique. This allows for improved signal quality estimation, fault management and resource allocation through improved control of transmission at the physical layer level. Because of the increased transparency in next generation networks, it is not possible to verify the quality of the signal at each node because of the limited number of optical-electrical-optical conversions, and therefore new non-intrusive mechanisms to achieve signal quality monitoring are needed. The synchronous sampling technique can be deployed to estimate the bit error rate, considered an important quality measure, and hence can be utilised to certify service level agreements between operators and customers. This method also has fault identification capabilities by analysing the shapes of the obtained histograms. Each impairment affects the histogram in a specific way, giving it a unique shape that can be used for root cause analysis. However, chromatic dispersion and polarisation mode dispersion (PMD) can have similar signatures on the histograms obtained at decision times. A novel technique to unambiguously discriminate between these two sources of degradation is proposed in this work. It consists of varying the decision times so that sampling also occurs at both edges of the eye diagram. This approach is referred to as three-section eye sampling technique. In addition, it is shown that this method can be used to accurately assess first order polarisation mode dispersion and can simultaneously estimate the differential group delay (DGD) and the power splitting ratio between the two states of polarisation. Since synchronous sampling is employed, the effect of PMD on the sampling times is also investigated. For the first time, closed form relationship between the shift in sampling time, the DGD and the power splitting ratio between the polarisation states is obtained. Three types of high-Q filter based clock recovery circuits are considered: without pre-processing circuits that can be used for RZ format and with an edge detector or a squarer pre-processing circuits suitable for NRZ format. Moreover, this technique can be used to monitor chromatic dispersion and a large monitoring range of more than 1750ps/nm is experimentally demonstrated at 10Gbit/s. Since it can monitor PMD and dispersion, this method can be deployed to control dynamic PMD or dispersion compensators. Furthermore, this technique offers easy and quick inline eye mask testing and timing jitter assessment.

Download activity - last month

Export as XMLJSONCSV

Download activity - last 12 months

Export as XMLJSONCSV

Downloads by country - last 12 months

Export as XMLJSONCSV

Archive Staff Only

View Item