Chen, Meng;
Jiang, Run;
Zhang, Tong;
Zhong, Hui;
Zhang, Mingzhong;
(2024)
Development of green engineered cementitious composites with acceptable dynamic split resistance utilising recycled polymer fibres.
Construction and Building Materials
, 415
, Article 134979. 10.1016/j.conbuildmat.2024.134979.
Preview |
Text
Accepted Version.pdf - Accepted Version Download (2MB) | Preview |
Abstract
Using recycled tyre polymer fibres (RTPF) to replace part of polyvinyl alcohol fibres (PVAF) is a strategy to produce green and economical engineered cementitious composites (ECC). This paper systematically investigated the influence of RTPF dosage (0.25–1.0 vol%) on split tensile performance of ECC under different strain rates. Results indicated that replacing PVAF with RTPF up to 0.5 vol% could still show a pronounced strain-hardening behaviour for ECC, although accompanied by a decrease in static split tensile strength. The dynamic split tensile performance of all ECC mixes was strongly sensitive to strain rate and all hybrid fibre reinforced ECC presented a greater strain rate effect than the mono-PVAF reinforced ECC. Under dynamic split tension, the specimens with various RTPF dosages could maintain their structural integrity. This paper suggested that RTPF can be adopted to replace part of PVAF to produce a greener and more economical ECC with satisfactory static and dynamic mechanical performance but the highest substitution amount should be set to 0.5 vol%.
Type: | Article |
---|---|
Title: | Development of green engineered cementitious composites with acceptable dynamic split resistance utilising recycled polymer fibres |
Open access status: | An open access version is available from UCL Discovery |
DOI: | 10.1016/j.conbuildmat.2024.134979 |
Publisher version: | http://dx.doi.org/10.1016/j.conbuildmat.2024.13497... |
Language: | English |
Additional information: | This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions. |
Keywords: | Strain hardening behaviour, Recycled polymer fibre, SHPB test, Dynamic increase factor, Strain rate effect |
UCL classification: | UCL UCL > Provost and Vice Provost Offices > UCL BEAMS UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Civil, Environ and Geomatic Eng |
URI: | https://discovery.ucl.ac.uk/id/eprint/10186216 |
Archive Staff Only
![]() |
View Item |