UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

Pyrolytic decomposition of methanol, ethanol, and butanol at various temperatures and residence times in a high-temperature flow reactor

Khan, Zuhaib Ali; Hellier, Paul; Ladommatos, Nicos; Almaleki, Ahmad; (2024) Pyrolytic decomposition of methanol, ethanol, and butanol at various temperatures and residence times in a high-temperature flow reactor. Journal of Analytical and Applied Pyrolysis , 177 , Article 106346. 10.1016/j.jaap.2023.106346. Green open access

[thumbnail of 1-s2.0-S0165237023004928-main.pdf]
Preview
PDF
1-s2.0-S0165237023004928-main.pdf - Published Version

Download (6MB) | Preview

Abstract

The potential use of low-carbon renewable fuel molecules, such as short chain alcohols, as a substitute or extender for fossil fuels, offers an opportunity to address pollutant emissions from transport and the sustainability of energy sources. Moreover, it may help reduce pollutants detrimental to air quality and human health, of which particulate matter (PM) is a significant contributor. To this end, the pyrolysis of three renewable alcohol fuels, methanol, ethanol, and butanol, has been studied in a laminar flow reactor at a sample inlet temperature range of 869 0C to 1120 0C. All the tested fuels were injected into a nitrogen carrier gas stream at a fixed concentration of 10,000 ppm on a carbon atom basis. A range of pyrolysis temperatures and residence times were selected so as to gain insight into the pyrolytic decomposition of short chain alcohol fuels to intermediate species important to the subsequent formation of benzene rings, larger polycyclic aromatic hydrocarbons (PAH), and particulate matter. In this paper, the presence of ten intermediary species that may aid in the formation of benzene rings and the growth of PAHs were quantified, with an emphasis on probable routes of first ring formation from the alcohols of varying chain length. Gaseous samples were collected from the pyrolyser at different temperatures and residence times using a novel high-temperature air-cooled ceramic sampling probe. The identification and quantification of intermediate gaseous species were undertaken by Gas Chromatography-Flame Ionization Detection (GC-FID). During methanol pyrolysis, only a tenth of the supplied carbon was detected as hydrocarbon gaseous species (mainly methane), with no benzene found, highlighting that methanol pyrolysis does not readily result in polyaromatic hydrocarbons and soot. Ethanol and butanol pyrolysis produced substantial amounts of ethylene and acetylene, suggesting a role in benzene and soot formation. Uniquely, pyrolysis of the longest chain alcohol, butanol, produced appreciable levels of C3 and C4 hydrocarbons, in addition to C1 and C2 hydrocarbons, suggesting additional reaction pathways for benzene formation and growth in comparison with ethanol.

Type: Article
Title: Pyrolytic decomposition of methanol, ethanol, and butanol at various temperatures and residence times in a high-temperature flow reactor
Open access status: An open access version is available from UCL Discovery
DOI: 10.1016/j.jaap.2023.106346
Publisher version: http://dx.doi.org/10.1016/j.jaap.2023.106346
Language: English
Additional information: © 2024 Published by Elsevier B.V. under a Creative Commons license (http://creativecommons.org/licenses/by/4.0/).
Keywords: Alcohol fuels, Fuel pyrolysis, High-temperature species sampling, Intermediate gaseous species, Benzene ring formation, Residence reaction time
UCL classification: UCL
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Mechanical Engineering
URI: https://discovery.ucl.ac.uk/id/eprint/10185538
Downloads since deposit
42Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item