UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

An investigation of laboratory test methods for predicting the in-use leakage performance of urine-absorbing aids in nursing homes

Cottenden, A; Macaulay, M; (2019) An investigation of laboratory test methods for predicting the in-use leakage performance of urine-absorbing aids in nursing homes. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine , 233 (1) pp. 23-34. 10.1177/0954411918792385. Green open access

[thumbnail of Cottenden_26Macaulay_Manuscript_for deposit.pdf]
Preview
Text
Cottenden_26Macaulay_Manuscript_for deposit.pdf - Accepted Version

Download (875kB) | Preview

Abstract

The absorption before leakage method for measuring the absorption capacity of urine-absorbing aids was investigated. Along with the existing international standard (ISO 11948-1:1996, the Rothwell method), it was run on 12 experimental products whose in-use leakage performance was established by 55 incontinent nursing home residents. Methods were evaluated by considering their simplicity, their repeatability within - and their reproducibility between - six laboratories, and their correlation with in-use product performance. ISO 11948-1:1996 - which measures the absorption capacity of products under simple conditions - showed good repeatability and reproducibility, and reasonable correlation with in-use data. However, it proved blind to the effects of leg cuffs that conferred measurable benefits in real use. It should, therefore, be used with caution. The absorption before leakage method - which measures how much a product will hold before leakage when it is mounted on a manikin and standard aliquots of liquid are applied - is more complex and had poorer repeatability and reproducibility. However, it had stronger correlations with in-use data and successfully detected the benefits of leg cuffs on insert products. It is concluded that it holds potential as a new international standard to replace or complement ISO 11948-1:1996, and the necessary refinement work has been ongoing since the 2007 project described here. Two other laboratory methods were run opportunistically. A rewet method (Spanish national standard UNE 153601-2:2008) - for measuring the escape of fluid from a product under pressure - showed poor repeatability and reproducibility. Finally, an acquisition method was used to measure how quickly products absorbed two successive standard aliquots of liquid. It proved robust, showing good repeatability and reproducibility. Although measurements generally correlated well with in-use leakage performance, a direct causal link is unlikely. Products with high absorption capacity tend also to absorb quickly.

Type: Article
Title: An investigation of laboratory test methods for predicting the in-use leakage performance of urine-absorbing aids in nursing homes
Location: England
Open access status: An open access version is available from UCL Discovery
DOI: 10.1177/0954411918792385
Publisher version: http://dx.doi.org/10.1177/0954411918792385
Language: English
Additional information: This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions.
Keywords: Incontinence, fluid absorption, international standards, laboratory-clinical correlations, urine-absorbing products
UCL classification: UCL
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Med Phys and Biomedical Eng
URI: https://discovery.ucl.ac.uk/id/eprint/10060189
Downloads since deposit
419Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item