Canever, N; Hughson, F; Macdonald, TJ; Nann, T; (2017) Electrospinning of Photocatalytic Electrodes for Dye-sensitized Solar Cells. JoVE - Journal of Visualized Experiments , 124 , Article e55309. 10.3791/55309.

Preview

Text document(5).pdf - Published Version Download (548kB) | Preview

Abstract

This work demonstrates a protocol to fabricate a fiber-based photoanode for dye-sensitized solar cells, consisting of a light-scattering layer made of electrospun titanium dioxide nanofibers (TiO2-NFs) on top of a blocking layer made of commercially available titanium dioxide nanoparticles (TiO2-NPs). This is achieved by first electrospinning a solution of titanium (IV) butoxide, polyvinylpyrrolidone (PVP), and glacial acetic acid in ethanol to obtain composite PVP/TiO2nanofibers. These are then calcined at 500 °C to remove the PVP and to obtain pure anatase-phase titania nanofibers. This material is characterized using scanning electron microscopy (SEM) and powder X-ray diffraction (XRD). The photoanode is prepared by first creating a blocking layer through the deposition of a TiO2-NPs/terpineol slurry on a fluorine-doped tin oxide (FTO) glass slide using doctor blading techniques. A subsequent thermal treatment is performed at 500 °C. Then, the light-scattering layer is formed by depositing a TiO2-NFs/terpineol slurry on the same slide, using the same technique, and calcinating again at 500 °C. The performance of the photoanode is tested by fabricating a dye-sensitized solar cell and measuring its efficiency through J-V curves under a range of incident light densities, from 0.25-1 Sun.

Download activity - last month

Export as CSVXMLJSON

Download activity - last 12 months

Export as XMLCSVJSON

Downloads by country - last 12 months

Export as JSONXMLCSV

Archive Staff Only

View Item