UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

Micro-imaging of buried layers and interfaces in ultrathin films by X-ray reflectivity

Jiang, J; Hirano, K; Sakurai, K; (2016) Micro-imaging of buried layers and interfaces in ultrathin films by X-ray reflectivity. Journal of Applied Physics , 120 (11) , Article 115301. 10.1063/1.4962311. Green open access

[thumbnail of 1.4962311.pdf]
Preview
Text
1.4962311.pdf - Published Version

Download (3MB) | Preview

Abstract

X-ray reflectivity is a promising technique for characterizing buried layers and interfaces in ultrathin films because of its ability to probe the electron density profile along the depth in a non-destructive manner. While routine X-ray reflectivity assumes the in-plane uniformity of the sample to be measured, it is also quite important to see buried inhomogeneous/patterned layers and interfaces. The present paper describes the addition of spatial resolution and imaging capability to an X-ray reflectivity technique to visualize surfaces and buried interfaces. To visualize quite wide viewing area size quickly, the image reconstruction scheme has been employed instead of the scanning of microbeam. Though the mathematics is quite close to X-ray computer tomography, the technique gives the image contrast caused by the difference in reflectivity at each in-plane point in the thin film sample. By choosing a grazing angle, the image gives inhomogeneity of X-ray reflectivity at the specific wavevector transfer. With a collimated monochromatic synchrotron X-ray beam of 0.05 mm (H) × 8 mm (V), the intensity profiles of X-ray reflection projections have been taken at many different in-plane rotation angles, from 0° to 180°. We have succeeded in visualizing buried layers and interfaces of the 8 mm dia area with the spatial resolution of better than 20 μm. Because of the brilliance of synchrotron radiation, the typical measuring time is shorter than 1 min. Three analytical cases have been discussed: (i) imaging of a buried layer and an interface covered by a protection layer, (ii) distinguishing different local parts of different thicknesses in an ultrathin film, and (iii) selective imaging of a specific metal in the thin film form.

Type: Article
Title: Micro-imaging of buried layers and interfaces in ultrathin films by X-ray reflectivity
Open access status: An open access version is available from UCL Discovery
DOI: 10.1063/1.4962311
Publisher version: https://doi.org/10.1063/1.4962311
Language: English
Additional information: This is the published version of record. For information on re-use, please refer to the publisher’s terms and conditions.
UCL classification: UCL
UCL > Provost and Vice Provost Offices
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Med Phys and Biomedical Eng
URI: https://discovery.ucl.ac.uk/id/eprint/10052509
Downloads since deposit
114Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item