eprintid: 1556155
rev_number: 21
eprint_status: archive
userid: 608
dir: disk0/01/55/61/55
datestamp: 2017-05-13 23:21:06
lastmod: 2020-02-17 04:58:17
status_changed: 2017-08-29 15:43:00
type: proceedings_section
metadata_visibility: show
creators_name: Vasilakis, N
creators_name: Papadimitriou, K
creators_name: Evans, D
creators_name: Morgan, H
creators_name: Prodromakis, T
title: The Lab-on-PCB framework for affordable, electronic-based point-of-care diagnostics: From design to manufacturing
ispublished: pub
divisions: UCL
divisions: A01
divisions: B04
divisions: C05
keywords: Microfluidics,
Biosensors,
Electrodes,
Manufacturing,
Temperature sensors,
MOSFET
note: This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions.
abstract: A novel, Lab-on-Printed Circuit Board (LoPCB) manufacturing technology is demonstrated for the development of low-cost electrochemical biosensors combined with microfluidics for Point-of-Care (PoC) applications. An analysis of the developed PCB architecture is presented, detailing the three development areas of the proposed LoPCB platform, i.e. microfluidics, biosensors and electronics. Design rules and potential fabrication limitations are also discussed, based on the characterization of prototype fabricated systems. Two PCB-based devices have been designed and fabricated, a microfluidic active diluter with a variable and actively controlled dilution ratio and an electrochemical biosensor. The obtained results demonstrate the feasibility of a complete LoPCB platform, where all three compartments will co-exist and co-operate, providing an electronic-based PoC system for electrochemical biosensing.
date: 2016-11-09
publisher: IEEE
oa_status: green
full_text_type: pub
language: eng
primo: open
primo_central: open_green
verified: verified_manual
elements_id: 1294214
doi: 10.1109/HIC.2016.7797713
lyricists_name: Papadimitriou, Konstantinos
lyricists_id: KPAPA49
actors_name: Waragoda Vitharana, Nimal
actors_id: NWARR44
actors_role: owner
full_text_status: public
series: Healthcare Innovation Point-Of-Care Technologies Conference (HI-POCT)
volume: 2016
place_of_pub: Cancun, Mexico
pagerange: 126-129
event_title: Healthcare Innovation Point-Of-Care Technologies Conference (HI-POCT) - 2016
institution: Healthcare Innovation Point-Of-Care Technologies Conference (HI-POCT)
book_title: Proceedings of 2016 IEEE Healthcare Innovation Point-Of-Care Technologies Conference (HI-POCT)
editors_name: Dhawan, AP
editors_name: Pearlman, PC
citation:        Vasilakis, N;    Papadimitriou, K;    Evans, D;    Morgan, H;    Prodromakis, T;      (2016)    The Lab-on-PCB framework for affordable, electronic-based point-of-care diagnostics: From design to manufacturing.                     In: Dhawan, AP and Pearlman, PC, (eds.) Proceedings of 2016 IEEE Healthcare Innovation Point-Of-Care Technologies Conference (HI-POCT).  (pp. pp. 126-129).  IEEE: Cancun, Mexico.       Green open access   
 
document_url: https://discovery.ucl.ac.uk/id/eprint/1556155/1/Papadimitriou_electronic-based%20point-of-care%20....pdf