%0 Journal Article
%@ 0306-2619
%A Hu, Y
%A Wang, J
%A Tan, CK
%A Sun, C
%A Liu, H
%D 2018
%F discovery:10066191
%J Applied Energy
%K Zone method, Aspen Plus, Fluidized beds, Process simulation, Radiation analysis
%P 168-179
%T Coupling detailed radiation model with process simulation in Aspen Plus: A case study on fluidized bed combustor
%U https://discovery.ucl.ac.uk/id/eprint/10066191/
%V 227
%X While providing a fast and accurate tool for simulating fluidized beds, the major limitations of classical zero-dimensional ideal reactor models used in process simulations become irreconcilable, such as models built into commercial software (e.g. Aspen Plus®). For example, the limitations of incorporating heat absorption by the water wall and super-heaters and inferring thermal reciprocity between each reactor model/module. This paper proposes a novel modelling approach to address these limitations by incorporating an external model that marries the advantages of the zone method and Aspen Plus to the greatest extent. A steady state operation of a 0.3 MW atmospheric bubbling fluidized-bed combustor test rig was simulated using the developed modelling approach and the results were compared with experimental data. The comparison showed that the predictions were in agreement with the measurements. Further improvement is to be expected through incorporating more realistic zoned geometry and more complex reaction mechanisms. In addition, the developed model has a relatively modest computing demand and hence demonstrates its potential to be incorporated into process simulations of a whole power plant.
%Z Copyright © The Author(s), 2018. This article is distributed under the terms of the Creative Commons Attribution 4.0 License (http://www.creativecommons.org/licenses/by/4.0/) which permits any use, reproduction and distribution of the work without further permission provided the original work is attributed.