%0 Journal Article %@ 1536-1225 %A Alkaraki, S %A Andy, AS %A Gao, Y %A Tong, KF %A Ying, Z %A Donnan, R %A Parini, C %D 2018 %F discovery:10059762 %J IEEE Antennas and Wireless Propagation Letters %K 3D printed antenna, 28 GHz, 5G, grooves, corrugations, compact, millimetre-wave (mm-wave) %N 11 %P 2051-2055 %T Compact and Low Cost 3D-Printed Antennas Metalized using Spray-Coating Technology for 5G mm-Wave Communication Systems %U https://discovery.ucl.ac.uk/id/eprint/10059762/ %V 17 %X This letter presents a design of two compact, light, rigid, and low-cost three-dimensionally (3-D) printed millimeter-wave antennas for a fifth-generation (5G) communication system. The proposed antennas consist of a radiating slot that is surrounded by a rectangular cavity and corrugations, which boost the gain performance of the antennas. Furthermore, the proposed antennas are fabricated using 3-D printing technology, and they are metalized using novel, simple, and low-cost techniques, which utilize the commercial conducive spray-coating technology. The proposed antennas operate at a 28 GHz band, where the first design is fed by a waveguide to prove the performance, whereas the second design is fed by a microstrip line to demonstrate the ability to be integrated into a compact structure. Measurement results show a wide impedance bandwidth, which enables the proposed antenna design to be a strong candidate for 5G applications. %Z This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions.