eprintid: 10059505
rev_number: 19
eprint_status: archive
userid: 608
dir: disk0/10/05/95/05
datestamp: 2018-10-25 14:57:11
lastmod: 2021-09-29 22:14:41
status_changed: 2018-10-25 14:57:11
type: article
metadata_visibility: show
creators_name: Henckel, J
creators_name: Holme, TJ
creators_name: Radford, W
creators_name: Skinner, JA
creators_name: Hart, AJ
title: 3D-printed Patient-specific Guides for Hip Arthroplasty
ispublished: pub
subjects: RNOH
divisions: UCL
divisions: B02
divisions: C10
divisions: D16
divisions: G86
note: This version is the author accepted manuscript. For information on re-use, please refer to the publisher’s terms and conditions.
abstract: Surgeons and engineers constantly search for methods to improve the
surgical positioning of implants used for joint arthroplasty. Rapid
prototyping is being used to develop patient-specific instrumentation
(PSI) and has already been successfully translated into large-scale
clinical use for knee arthroplasty. PSI has been used in shoulder
arthroplasty; however, it is not yet known whether PSI provides
improved accuracy and outcomes compared with conventional
methods in either shoulder arthroplasty or knee arthroplasty. In the hip,
PSI has been limited to the positioning of custom-manufactured
implants and a small number of surgeons testingthe emerging solutions
from different manufacturers. Early results indicate consistent accurate
positioning of implants with the use of PSI in hip arthroplasty but with
added costs and uncertain effect on clinical outcomes.
date: 2018-08-15
date_type: published
publisher: LIPPINCOTT WILLIAMS & WILKINS
official_url: https://doi.org/10.5435/JAAOS-D-16-00719
oa_status: green
full_text_type: other
language: eng
primo: open
primo_central: open_green
verified: verified_manual
elements_id: 1579093
doi: 10.5435/JAAOS-D-16-00719
lyricists_name: Hart, Alister
lyricists_name: Skinner, John
lyricists_id: AHART91
lyricists_id: JAMSK19
actors_name: Hart, Alister
actors_id: AHART91
actors_role: owner
full_text_status: public
publication: Journal of the American Academy of Orthopaedic Surgeons
volume: 26
number: 16
pagerange: E342-E348
pages: 7
issn: 1940-5480
citation:        Henckel, J;    Holme, TJ;    Radford, W;    Skinner, JA;    Hart, AJ;      (2018)    3D-printed Patient-specific Guides for Hip Arthroplasty.                   Journal of the American Academy of Orthopaedic Surgeons , 26  (16)   E342-E348.    10.5435/JAAOS-D-16-00719 <https://doi.org/10.5435/JAAOS-D-16-00719>.       Green open access   
 
document_url: https://discovery.ucl.ac.uk/id/eprint/10059505/1/3D-printed%20Patient-specific%20Guides%20for%20Hip%20Arthroplasty.pdf