UCL Discovery

A

Aartojarvi, R; Hoyt, J; Van Terwisga, T; Zangeneh, M; (2002) Final report of the specialist committee on validation of waterjet test procedures. Presented at: Proceedings of 23rd international towing tank conference.

B

Baker, AP; Hodgson, SNB; Edirisinghe, MJ; (2002) Production of tungsten oxide coatings, via sol-gel processing of tungsten anion solutions. SURF COAT TECH , 153 (2-3) 184 - 193.

Barone, S; Burriesci, G; Petrucci, G; (2002) Computer aided photoelasticity by an optimum phase stepping method. EXP MECH , 42 (2) 132 - 139.

Basanta, D; Miodownik, MA; Holm, EA; Bentley, PJ; (2002) Designing the internal architecture of metals using a genetic algorithm. Presented at: UNSPECIFIED.

Basit, AW; Newton, JM; Lacey, LF; (2002) Susceptibility of the H2-receptor antagonists cimetidine, famotidine and nizatidine, to metabolism by the gastrointestinal microflora. Int J Pharm , 237 (1-2) pp. 23-33.

Beale, R; Homer-Vanniasinkam, S; Gough, MJ; (2002) Graft infection. EUR J VASC ENDOVASC , 23 (6) 571 - 572. 10.1054/ejvs.2002.1636.

Boyes, M; Greig, AR; (2002) Fuel cells and how they will impact on warship design. Presented at: 6th Intl Naval Engineering Conf (INEC), Glasgow, UK.

Boyes, M; Greig, AR; (2002) An Introduction to Fuel Cells and their impact on Warship Design. Journal of Naval Engineering , 40 (3) pp. 428-445.

Bucknall, RWG; Greig, AR; (2002) The future of simulation in marine engineering design. Proceedings of IMarEST Part B: Journal of Marine Design and Operations , 1 pp. 3-10.

Burriesci, G; (2002) Studio numerico del comportamento della valvola aortica naturale con interazione fluido struttura. Presented at: XXXI National Congress of AIAS - Stress Analysis Italian Association, Parma, Italy.

Burriesci, G; Carmody, CJ; Howard, IC; Patterson, EA; (2002) Fluid structure interaction of heart valves. Presented at: IV World Congress of Biomechanics, Calgary, Alberta, Canada.

Butty, VD; Gudjonsson, K; Buchel, P; Makhijani, VB; Ventikos, Y; Poulikakos, D; (2002) Residence times and basins of attraction for a realistic right internal carotid artery with two aneurysms. Biorheology , 39 (3-4) pp. 387-393.

C

Chaniotis, AK; Poulikakos, D; Ventikos, Y; (2002) Numerical investigation of heat transfer from a surface under the influence of two impinging pulsating slot jets. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD , 372 (1) pp. 15-21. 10.1115/IMECE2002-32901.

Chaniotis, AK; Poulikakos, D; Ventikos, Y; (2002) Numerical investigation of heat transfer from a surface under the influence of two impinging pulsating slot jets. ASME International Mechanical Engineering Congress and Exposition, Proceedings , 1 pp. 15-21. 10.1115/IMECE2002-32901.

Choo, B; Zangeneh, M; (2002) Development of an adaptive unstructured 2D inverse design method for turbomachinery blades. Presented at: ASME TURBO EXPO 2002.

Choo, BMF; Zangeneh, M; (2002) Development of an (adaptive) unstructured 2-D inverse design method for turbomachinery blades. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI , 5 B pp. 1099-1110. 10.1115/GT2002-30620.

Chopra, R; Alderborn, G; Podczeck, F; Newton, JM; (2002) The influence of pellet shape and surface properties on the drug release from uncoated and coated pellets. INT J PHARM , 239 (1-2) pp. 171-178.

Chung, YM; Luo, KH; (2002) Unsteady Heat Transfer Analysis of an Impinging Jet. Journal of Heat Transfer , 124 (6) p. 1039. 10.1115/1.1469522.

Chung, YM; Luo, KH; Sandham, ND; (2002) Numerical study of momentum and heat transfer in unsteady impinging jets. International Journal of Heat and Fluid Flow , 23 (5) pp. 592-600. 10.1016/S0142-727X(02)00155-8.

Colbourne, D; Rajapaksha, L; Suen, KO; (2002) System balancing for zeotropic refrigerants. Presented at: Proceedings of the 9th International Refrigeration and Air Conditioning Conference.

Colbourne, D; Suen, KO; (2002) Advanced system balancing for pure and mixture refrigerants. Presented at: Proceedings of the Institute of Refrigeration.

D

Dietzel, M; Haferl, S; Ventikos, Y; Poulikakos, D; (2002) Marangoni and variable viscosity phenomena in picoliter size solder droplet deposition. ASME International Mechanical Engineering Congress and Exposition, Proceedings , 7 pp. 15-22. 10.1115/IMECE2002-32111.

Dietzel, M; Ventikos, Y; Haferl, S; Poulikakos, D; (2002) Marangoni and variable viscosity phenomena in picoliter size solder droplet deposition. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD , 372 (7) pp. 15-22. 10.1115/IMECE2002-32111.

Dover, WD; Stacey, A; Tantbirojn, N; Brennan, FP; (2002) Variable amplitude corrosion fatigue of high strength jack-up steels. Presented at: Proceedings of the 21st International Conference on Offshore Mechanics and Artic Engineering.

Ducci, A; Konstantinidis, E; Balabani, S; Yianneskis, M; (2002) Direct measurement of the turbulent kinetic energy viscous dissipation rate behind a grid and a circular cylinder. Presented at: 11th International Symposium on Applications of Laser Techniques to Fluids Mechanics, Lisbon, Portugal.

Díaz-Zuccarini, V; LeFèvre, J; Rahmani, A; Delgado, M; (2002) Integrating a Bond Graph Based Model of Chemo Mechanical Coupling with Huxley's Sliding Filament Theory. Presented at: UNSPECIFIED.

de Leeuw, B; Brennan, FP; (2002) Assessment of structural integrity monitoring systems in condition monitoring and diagnostic engineering management (COMADEM 2001). Presented at: Proceedings of the 14th international congress.

E

Eames, I; Gilbertson, MA; Wright, N; (2002) Fluid mechanics of insulation board manufacture. American Institute of Chemical Engineering , 48 pp. 2481-2491.

Eccles, KA; Homer-Vanniasinkam, S; Estdale, SE; Parkin, SM; Graham, AM; (2002) Roles of adhesion molecules in endothelial cell : neutrophil interactions following hypoxia/reoxygenation. FASEB J , 16 (4) A596 - A596.

F

Fromme, P; Sayir, MB; (2002) Defect detection by the scattering analysis of flexural waves. In: Gdoutos, EE, (ed.) Recent Advances in Experimental Mechanics. (pp. 421-432). Kluwer Academic Publishers

G

Goto, A; Zangeneh, M; (2002) Hydrodynamic design of pump diffuser using inverse design method and CFD. J FLUID ENG-T ASME , 124 (2) 319 - 328. 10.1115/1.1467599.

Graham, AM; Akhtar, FJ; Parkin, SM; Homer-Vanniasinkam, S; Bibby, MC; (2002) Comparison of the anti-angiogenic effects of troglitazone using various delivery systems in an in vitro model of angiogenesis. FASEB J , 16 (4) A213 - A213.

Greig, A; Boyes, M; (2002) Fuel cells and how they will impact on warship design. In: (pp. pp. 247-257).

H

Haller, KK; Ventikos, Y; Poulikakos, D; Monkewitz, P; (2002) Computational study of high-speed liquid droplet impact. Journal of Applied Physics , 92 (5) pp. 2821-2828. 10.1063/1.1495533.

Harrigan, JJ; Tan, PJ; Reid, SR; (2002) Dynamic properties of aluminium foam: Measurements and Modelling. Presented at: 14th US National Congress of Theoretical and Applied Mechanics, 23rd - 28th June.

Herath, HMTU; DiSilvio, L; Edirisinghe, MJ; Evans, JRG; (2002) Scandia- a novel biomaterial. Presented at: 17th European Society for Biomaterials Annual Conference, 2002, Barcelona, Spain..

Hu, P; Wu, GX; Ma, QW; (2002) Numerical Simulation of Nonlinear Wave Radiation by a Moving Vertical Cylinder. Ocean Engineering , 29 pp. 1733-1750.

Hu, Z; Luo, X; Luo, KH; (2002) Numerical Simulation of Particle Dispersion in a Spatially Developing Mixing Layer. Theoretical and Computational Fluid Dynamics , 15 (6) pp. 403-420. 10.1007/s00162-002-0058-9.

Hu, ZZ; Wu, GX; Hu, P; (2002) Tri-tree based FEM analysis of wave interaction with 3D cylindrical structures. Presented at: 17th International Workshop on Water Waves and Floating Bodies.

Hunt, JCR; Eames, I; (2002) The disappearance of laminar and turbulent wakes in complex flows. J FLUID MECH , 457 111 - 132. 10.1017/S0022112001007236.

J

Jayasinghe, SN; Edirisinghe, M; (2002) Ceramic Forming by Electrostatic Atomization. Proc. of the ILASS(2002) , Zaragoza, Spain pp. 389-394.

Jayasinghe, SN; Edirisinghe, MJ; (2002) Effect of viscosity on the size of relics produced by electrostatic atomization. J AEROSOL SCI , 33 (10) 1379 - 1388.

Jayasinghe, SN; Edirisinghe, MJ; (2002) Obtaining Fine Droplet Relics by Electrostatic Atomization of Viscous Liquids. Journal of Materials Science Letters , 37 pp. 1987-1992.

Jayasinghe, SN; Edirisinghe, MJ; (2002) A novel method of forming open cell ceramic foam. J POROUS MAT , 9 (4) 265 - 273.

Jayasinghe, SN; Edirisinghe, MJ; De Wilde, T; (2002) A novel ceramic printing technique based on electrostatic atomization of a suspension. MATER RES INNOV , 6 (3) 92 - 95. 10.1007/s10019-002-0192-4.

K

Kelley, S; Wijesinghe, LD; Homer-Vanniasinkam, S; Mavor, AID; Gough, MJ; (2002) Long-term outcome of surgical revascularization for bilateral renal artery stenosis. BRIT J SURG , 89 (4) 521 - 522.

Kibria, SMG; Kerr, KG; Dave, J; Gough, MJ; Homer-Vanniasinkam, S; Mavor, AID; (2002) Bacterial colonisation of Doppler probes on vascular surgical wards. EUR J VASC ENDOVASC , 23 (3) 241 - 243. 10.1053/ejvs.2001.1552.

L

Lafferty, SV; Newton, JM; Podczeck, F; (2002) Characterisation of the mechanical properties of polymer films formed from aqueous polymer dispersions by creep testing. INT J PHARM , 239 (1-2) pp. 143-148.

Lafferty, SV; Newton, JM; Podczeck, F; (2002) Dynamic mechanical thermal analysis studies of polymer films prepared from aqueous dispersion. INT J PHARM , 235 (1-2) pp. 107-111.

Lafferty, SV; Newton, JM; Podczeck, F; (2002) Kinetic examination of the mechanical transition of polymethyl methacrylate films prepared from aqueous dispersions. INT J PHARM , 239 (1-2) pp. 179-183.

Lange, A; Harker, AH; Saffari, N; (2002) Modelling of elastic wave multiple-scattering in metal-matrix composites. In: Shang, ER and Li, Q and Gao, TF, (eds.) (Proceedings) Theoretical and Computational Acoustics 2001. (pp. pp. 357-366). World Scientific: Beijing.

Leong, CW; Newton, JM; Basit, AW; Podczeck, F; Cummings, JH; Ring, SG; (2002) The formation of colonic digestible films of amylose and ethylcellulose from aqueous dispersions at temperatures below 37 degrees C. EUR J PHARM BIOPHARM , 54 (3) 291 - 297.

Li, Y; Zhao, H; Peng, Z; Ladommatos, N; (2002) Particle image velocimetry measurement of in-cylinder flow in internal combustion engines - experiment and flow structure analysis. P I MECH ENG D-J AUT , 216 (D1) 65 - 81.

Li, Y; Zhao, H; Peng, Z; Ladommatos, N; (2002) Tumbling flow analysis in a four valve SI engine using particle image velocimetry. International Journal of Engine Research , 3 (3) pp. 139-155. 10.1243/14680870260189262.

Luo, KH; Jiang, X; (2002) Direct numerical simulation of reacting corner plumes. In: Castro, IP and Hancock, PE and Thomas, TG, (eds.) Advances in Turbulence IX. (351 - 354). CIMNE: Barcelona.

M

MacRitchie, KA; Newton, JM; Rowe, RC; (2002) The evaluation of the rheological properties of lactose/microcrystalline cellulose and water mixtures by controlled stress rheometry and the relationship to the production of spherical pellets by extrusion/spheronization. Eur J Pharm Sci , 17 (1-2) pp. 43-50.

Miodownik, MA; (2002) A review of microstructural computer models used to simulate grain growth and recrystallisation in aluminium alloys. Journal of Light Metals , 2 (3 SPEC.) pp. 125-135. 10.1016/S1471-5317(02)00039-1.

N

Nangrejo, MR; Edirisinghe, MJ; (2002) Porosity and strength of silicon carbide foams prepared using preceramic polymers. J POROUS MAT , 9 (2) 131 - 140.

Newton, JM; (2002) The preparation of pellets with salicified microcrystalline cellulose by extrusion and spheronisation. Presented at: 7th European congrss of Pharmaceutical Sciences, Stockholm, Sweden.

Nikolakakis, I; Newton, JM; Malamataris, S; (2002) Solid state 'adsorption' of fine antibiotic powders onto sorbitol: effects of particle size, state of sorbed water and surface free energy characteristics. Eur J Pharm Sci , 17 (4-5) pp. 229-238.

Nur, HM; Song, JH; Evans, JRG; Edirisinghe, MJ; (2002) Ink-jet printing of gold conductive tracks. J MATER SCI-MATER EL , 13 (4) 213 - 219.

O

Omar, AA; Mavor, AI; Homer-Vanniasinkam, S; (2002) Evaluation of dermagraft as an alternative to grafting for open fasciotomy wounds. J Wound Care , 11 (3) pp. 96-97. 10.12968/jowc.2002.11.3.26383.

P

PODCZECK, F; (2002) Adhesion measurements to aid the formulation of dry powder inhalations. In: Ramchandran, U, (ed.) Current topics in colloidal and interface science. (pp. 221-235). Research Trends: Trivandrum (India).

PODCZECK, F; (2002) Rheology of pharmaceutical systems. In: Swarbrick, J, (ed.) Encyclopedia of pharmaceutical technology. (pp. 1-20). Marcel Dekker: New York.

Perissutti, B; Newton, JM; Podczeck, F; Rubessa, F; (2002) Preparation of extruded carbamazepine and PEG 4000 as a potential rapid release dosage form. EUR J PHARM BIOPHARM , 53 (1) pp. 125-132.

Podczeck, F; (2002) The determination of the critical stress intensity factor in mode II loading and the shear fracture strength of pharmaceutical powder specimens. J MATER SCI , 37 (17) pp. 3595-3598.

Podczeck, F; Almeida, SM; (2002) Determination of the mechanical properties of pellets and film coated pellets using Dynamic Mechanical Analysis (DMA). EUR J PHARM SCI , 16 (3) pp. 209-214.

Podczeck, F; Jones, BE; (2002) The in vitro dissolution of theophylline from different types of hard shell capsules. DRUG DEV IND PHARM , 28 (9) pp. 1163-1169. 10.1081/DDC-120014583.

R

Rajapaksha, L; Colbourne, D; Suen, KO; (2002) Size matching consideration during replacement of the condensing unit. Presented at: Proceedings of the 9th International Refrigeration and Air conditioning Conference.

Roduner, C; Vogt, D; Zangeneh, M; (2002) Improving a vaned diffuser for a given centrifugal impeller by 3D inverse design. Presented at: ASME TURBO EXPO 2002.

Rowlands, T; Homer-Vanniasinkam, S; (2002) Can leucocyte depletion in abdominal aortic aneurysm (AAA) repair influence perioperative cytokine release? FASEB J , 16 (4) A591 - A591.

S

Smith, FC; Scarpa, F; Burriesci, G; (2002) Simultaneous optimization of the electromagnetic and mechanical properties of honeycomb materials. Presented at: SPIE's 9th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA.

Sousa, JJ; Sousa, A; Moura, MJ; Podczeck, F; Newton, JM; (2002) The influence of core materials and film coating on the drug release from coated pellets. INT J PHARM , 233 (1-2) pp. 111-122.

Spark, JI; Robinson, JM; Gallavin, L; Gough, MJ; Homer-Vanniasinkam, S; Kester, RC; Scott, DJA; (2002) Patients with chronic critical limb ischaemia have reduced total antioxidant capacity and impaired nutritional status. EUR J VASC ENDOVASC , 24 (6) 535 - 539. 10.1053/ejvs.2002.1755.

Stride, E; Saffari, N; (2002) Investigating the destruction of microbubble ultrasound contrast agents. Presented at: 2nd Anglo-French Physical Acoustics Conference, 10-12th December, Wissant, France.

Stride, E; Saffari, N; (2002) Modelling the destruction of ultrasound contrast agents. Presented at: Institute of Physics Bio-medical Acoustics Meeting, Nottingham Trent University.

T

Talei-Faz, B; Brennan, FP; Dover, WD; Burdekin, FM; (2002) Experimental validation of the ultimate strength of brace members with circumferential cracks. (Offshore Technology Report 2001/081 ). United Kingdom Health and Safety Executive: UK.

Talei-Faz, B; Dover, WD; Brennan, FP; (2002) Static strength of cracked high strength steel tubular joints. (Offshore Technology Report 2000/078 ). United Kingdom Health and Safety Executive: UK.

Taylor, J; Faughey-Scraggs, M; Salter, J; Russell, J; Granger, DN; Homer-Vanniasinkam, S; (2002) Differential expression of selectins in a model of hindlimb ischaemia reperfusion injury (IRI). BRIT J SURG , 89 55 - 55.

Taylor, J; Faughey-Scraggs, M; Salter, J; Russell, J; Homer-Vanniasinkam, S; Granger, DN; (2002) Differential expression of E- and P-selectin in a model of hindlimb ischemia reperfusion injury (IRI). FASEB J , 16 (4) A119 - A119.

Tiow, W; Zangeneh, M; (2002) Application of a 3D viscous transonic inverse method to NASA rotor 67. Proceedings of the Institution of Mechanical Engineers - Part A: Journal of Power and Energy , 216 (3) pp. 243-255. 10.1243/095765002320183568.

Tiow, W; Zangeneh, M; (2002) A novel 3D inverse design method for the design of turbomachinery blades in rotational viscous flow: Theory and applications. Task Quarterly Journal , 6 (1) pp. 63-78.

Tiow, W; Zangeneh, M; (2002) Three dimensional inverse design method based on pressure loading for the design of turbomachinery blades. In: Elder, RL and Tourlidakis, A and Yates, MK, (eds.) The advances of CFD in fluid machinery design. Professional Engineering Publishing

Tiow, W.T.; Zangeneh, M.; (2002) Application of a three-dimensional viscous transonic inverse method to NASA rotor 67. Proceedings of the Institution of Mechanical Engineers. Part A: Journal of Power and Energy , 216 (3) pp. 243-255. 10.1243/095765002320183568.

Tiow, WT; Yiu, KFC; Zangeneh, M; (2002) Application of simulated annealing to inverse design of transonic turbomachinery cascades. P I MECH ENG A-J POW , 216 (A1) 59 - 73.

Troxler, M; Hill, K; Graham, A; Homer-Vanniasinkam, S; (2002) ADP/ATP ratios in patients having aortic aneurysm repair: a marker of celluar stress. FASEB J , 16 (5) A1207 - A1207.

Troxler, M; Hill, K; Mavor, AID; Gough, MJ; Homer-Vanniasinkam, S; (2002) Adenosine 5 '-diphosphate : adenosine 5 '-triphosphate ratios in patients undergoing abdominal aortic aneurysm surgery: a rapid measure of cellular. BRIT J SURG , 89 (5) 651 - 651.

Troxler, M; Naseem, K; Albazaz, R; Homer-Vanniasinkam, S; (2002) Is nitric oxide metabolism deranged after aortic aneurysm surgery? FASEB J , 16 (4) A208 - A208.

Troxler, M; Naseem, K; Mavor, AID; Gough, MJ; Homer-Vanniasinkam, S; (2002) Is nitric oxide metabolism deranged following conventional abdominal aortic aneurysm surgery? BRIT J SURG , 89 (5) 658 - 658.

Troxler, M; Naseem, K; Mavor, AID; Gough, MJ; Homer-Vanniasinkam, S; (2002) Plasma nitrotyrosine: a novel marker of vascular inflammation in abdominal aortic aneurysmal disease? BRIT J SURG , 89 (5) 658 - 659.

Troxler, M; Russell, D; Bodenham, AR; Homer-Vanniasinkam, S; Mavor, AID; Gough, MJ; (2002) Prospective randomized study of postoperative pain after thoracoscopic dorsal sympathectomy: harmonic scalpel versus conventional diathermy. BRIT J SURG , 89 (4) 524 - 524.

Tuck, RA; Burden, AP; Hood, C; Lee, W; Waite, MS; Edirisinghe, MJ; (2002) Method for Creating Field Electron Emission Materials and Devices. 2367186.

V

Ventikos, Y; (2002) The effect of imperfections on the emergence of three-dimensionality in stationary vortex breakdown bubbles. Physics of Fluids , 14 (3) 10.1063/1.1448349.

W

Wijeyaratne, M; Kibria, SG; Jarvis, S; Stead, LA; Evans, JA; Mavor, AID; Homer-Vanniasinkam, S; Wijeyaratne, M; Kibria, SG; Jarvis, S; Stead, LA; Evans, JA; Mavor, AID; Homer-Vanniasinkam, S; Gough, MJ; - view fewer (2002) Multiple cross-sectional echomorphology: a new method for identifying high-risk carotid plaques. BRIT J SURG , 89 99 - 99.

Wijeyaratne, SM; Stead, L; Homer-Vanniasinkam, S; Mavor, AID; Gough, MJ; (2002) A new technique for carotid endarterectomy allowing duplex quality control and enhanced plaque research. BRIT J SURG , 89 99 - 99.

Wilding, IR; Bloor, JR; Ball, DJ; Prior, DV; Connor, AL; Basit, AW; Newton, JM; (2002) Formulation optimisation studies on an oral,colon-spacific system . colal-pred) for prednisolone metasulobenzoate (ati-2502) using pharmascintigraphy. Presented at: Anerican Assiciation of Pharmaceutical Scientists.

Z

Zangeneh, M; Goto, A; Harada, H; (2002) Turbomachinery and method of manufacturing the same. DE 69527316 (T2).

Zangeneh, M; SAKURAI, T; goto, A; (2002) An impeller with splitter blade. JP 2002516960 (A).

Zangeneh, M; Vogt, D; Roduner, C; (2002) Improving a vaned diffuser for a given centrifugal impeller by 3D inverse design. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI , 5 B pp. 1111-1122. 10.1115/GT2002-30621.

Zangeneh, M; goto, A; (2002) Turbomachinery and method of manufacturing the same. DK 865577 (T3).

Zhao, X; Evans, JRG; Edirisinghe, MJ; Song, JH; (2002) Ink-jet printing of ceramic pillar arrays. J MATER SCI , 37 (10) 1987 - 1992.

Zhao, XL; Evans, JRG; Edirisinghe, MJ; Song, JH; (2002) Direct ink-jet printing of vertical walls. J AM CERAM SOC , 85 (8) 2113 - 2115.

Zhou, X; Luo, KH; Williams, JJR; (2002) Vortex dynamics in spatio-temporal development of reacting plumes. Combustion and Flame , 129 (1-2) pp. 11-29. 10.1016/S0010-2180(01)00368-6.