UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Browse by UCL Departments and Centres

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Author | Type
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Number of items: 97.

A

Aleiferis, PG; Taylor, AMKP; Whitelaw, JH; Ishii, K; Urata, Y; (2000) Cyclic Variations of Initial Flame Kernel Growth in a Honda VTEC-E Lean-Burn Spark-Ignition Engine. SAE Transactions, Journal of Engines , 109 (3) pp. 1340-1380. 10.4271/2000-01-1207.

Andrews, DJ; (2000) Future warship design and the prospects for trimaran warships. In: (Proceedings) RINA International Conference R.V.TRITON: Trimaran Demonstrator Project, Solent Conference Centre, Southampton, April.

Avital, EJ; Sandham, ND; Luo, KH; (2000) Stretched Cartesian grids for solution of the incompressible Navier-Stokes equations. International Journal for Numerical Methods in Fluids , 33 (6) pp. 897-918. 10.1002/1097-0363(20000730)33:6<897::aid-fld37>3.0.co;2-4.

Avital, EJ; Sandham, ND; Luo, KH; (2000) Stretched Cartesian grids for solution of the incompressible Navier-Stokes equations. International Journal for Numerical Methods in Fluids , 33 (6) pp. 897-918. 10.1002/1097-0363(20000730)33:6<897::AID-FLD37>3.0.CO;2-4.

B

Bao, X; Edirisinghe, M; (2000) Novel Polymeric Precursor Routes for the Preparation of SiC-Si3N4 Composites. Materials Technology , 15 pp. 137-142.

Bao, X; Nangrejo, MR; Edirisinghe, MJ; (2000) Preparation of silicon carbide foams using polymeric precursor solutions. J MATER SCI , 35 (17) 4365 - 4372.

Bao, XJ; Edirisinghe, MJ; (2000) Novel polymeric precursor routes for the preparation of silicon carbide silicon nitride composites. MATER TECHNOL , 15 (2) 137 - 142.

Bao, XJ; Edirisinghe, MJ; (2000) Polycyclodisilazane: a new polymeric precursor for silicon nitride-based ceramics. J MATER CHEM , 10 (2) 395 - 401.

Blackman, S; Rivas, S; Greig, AR; Tizani, W; Whitehead, A; Bertaso, D; (2000) Automated FCAW for tubular structures. In: (Proceedings) International Conference on Advances in Welding Technology 2000, Gas Metal Arc Welding for the 21st Century, Orlando, USA, 6-8 December. (pp. pp. 269-278).

Brennan, FP; Peleties, P; Hellier, AK; (2000) Predicting weld toe stress concentration factors for T and skewed T-joint plate connections. INTERNATIONAL JOURNAL OF FATIGUE , 22 (7) pp. 573-584. 10.1016/S0142-1123(00)00031-1.

Bryce, DJ; Ladommatos, N; Zhao, H; (2000) Quantitative investigation of soot distribution by laser-induced incandescence. APPL OPTICS , 39 (27) 5012 - 5022.

Bucknall, RWG; Greig, AR; Patel, P; Geertsma, RD; Bernier, N; (2000) The role of simulation in marine engineering design in the 21st century. In: (Proceedings) International Naval Engineering Conference, INEC 2000. IMarE

Bucknall, RWG; Greig, AR; Patel, R; Geertsma, RD; Bernier, N; (2000) The role of simulation in marine engineering design in the 21st century. In: (Proceedings) 5th Intl Naval Engineering Conf (INEC). (pp. pp. 163-171). IMarE

Bucknall, RWG; van Greithuysen, WJ; (2000) Electrical propulsion of naval and merchant vessls. In: (Proceedings) Lloyds List Conference: Ship Propulsion Systems, Manchester, December.

Burriesci, G; (2000) Influenza della geometria dei lembi sullo stato di tensione delle bioprotesi cardiache. In: (Proceedings) XXIX National Congress of AIAS - Stress Analysis Italian Association. (pp. pp. 801-809). : Lucca, Italy.

Butty, VD; Buchel, P; Ventikos, Y; Gudjonsson, K; Makhijani, VB; Poulikakos, D; (2000) Flow through a realistic arterial geometry with two aneurysms: Mixing characteristics and residence times. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED , 256 pp. 53-58.

C

Calnan, P; Zhao, H; Ladommatos, N; Ma, T; (2000) The influence of dilution composition and temperature upon a stratified charge spark ignition engine. SAE Transactions: Journal of Fuels and Lubricants (SAE 2000)

Carlisle, C; Curlewis, A; Snelling, P; Bucknall, RWG; van Greithuysen, WJ; (2000) Exploration of a trimaran based concept for a fast sea-lift logistics ship. In: (Proceedings) Proceedings of Warship 2000 - Warships for Amphibious Operations and Minewarfare, The Royal Insititution of Naval Architects, London, 6-7 June. (pp. pp. 1-13).

Chen, K; Brennan, FP; Dover, WD; (2000) Non-contacting residual stress decay detecting using alternating current stress measurement. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , 35 (4) pp. 227-233. 10.1243/0309324001514378.

Chen, K; Brennan, FP; Dover, WD; (2000) Thin-skin AC field in anisotropic rectangular bar and ACPD stress measurement. NDT & E INTERNATIONAL , 33 (5) pp. 317-323. 10.1016/S0963-8695(99)00055-9.

Chiwele, I; Jones, BE; Podczeck, F; (2000) The shell dissolution of various empty hard capsules. CHEMICAL & PHARMACEUTICAL BULLETIN , 48 (7) pp. 951-956.

Colbourne, D; Suen, KO; (2000) Assessment of performance of hydrocarbon refrigerants. In: (Proceedings) Proceedings of the IIR Natrual Working Fluids Gustav Lorenzten Conference, Purdue, USA.

Cooper, D; Graham, AM; Parkin, SM; Plevin, R; Homer-Vanniasinkam, S; (2000) Characteristics of activation of c-jun N terminal kinase (JNK) and p38 MAP kinase in resopnse to TNFalpha in human endothelial cells. FASEB J , 14 (4) A707 - A707.

D

Dover, WD; Brennan, FP; Etube, LS; (2000) Structural integrity monitoring using alternating current field measurements. In: (Proceedings) Proceedings of 5th International Conference on Engineering Structural Integrity Assessment, Structural Integrity in the 21st Century, 19-21 September.

Drake, KR; (2000) Transient design waves for green-water loading on bulk carriers. Journal of Marine Science and Technology , 5 (1) pp. 21-30. 10.1007/s007730070018.

E

Etube, LS; Brennan, FP; Dover, WD; (2000) A new method for predicting stress intensity factors in cracked welded tubular joints. INTERNATIONAL JOURNAL OF FATIGUE , 22 (6) pp. 447-456. 10.1016/S0142-1123(00)00024-4.

F

Fricke, W; Berge, S; Brennan, FP; Cui, W; Josefson, L; Kierkegaard, H; Kihl, D; ... Yoon, JH; + view all (2000) Reply to the discussion of the report of Committee III.2, Fatigue and Fracture. In: (Proceedings) Proceedings of 13th International Ship and Offshore Structures Congress, ISSC 2000, Nagasaki, Japan. (pp. pp. 133-141).

Fricke, W; Berge, S; Brennan, FP; Cui, W; Josefson, L; Kierkegaard, H; Kihl, D; ... Yoon, JH; + view all (2000) Report of Committee III.2, Fatigue and Fracture. In: (Proceedings) Proceedings of 13th International Ship and Offshore Structures Congress, ISSC 2000, Nagasaki, Japan. (pp. pp. 323-392).

Fromme, P; Sayir, MB; (2000) Experimental detection of cracks at rivets using structural wave propagation. In: (Proceedings) Proceedings NDTISS'99 - International Symposium on Nondestructive Testing.

G

Graham, AM; Cooper, D; Parkin, SM; Homer-Vanniasinkam, S; (2000) TNF-mediated human endothelial cell death following inhibition of protein synthesis in a JNK dependent manner. FASEB J , 14 (4) A707 - A707.

H

Homer-Vanniasinkam, S; Eccles, K; Estdale, S; Graham, A; Parkin, S; (2000) Hypoxia-reoxygenation induces neutrophil binding to human adult endothelium under flow conditions. FASEB J , 14 (4) A705 - A705.

Homer-Vanniasinkam, S; Mathie, R; Estdale, S; Papanastasiou, S; (2000) Preconditioning ameliorates skeletal muscle reperfusion injury. FASEB J , 14 (4) A467 - A467.

Homer-Vanniasinkam, S; Rowlands, T; Parkin, S; Graham, A; Cavanagh, S; (2000) Lower limb revascularisation induces differential levels of mediator release in the local versus systemic circulation. FASEB J , 14 (4) A467 - A467.

Hu, Z.Z.; (2000) Numerical simulation of laminar separated flows on adaptive tri-tree grids with the finite volume method. Doctoral thesis , University of London. Green open access
file

Huang, J; Di Silvio, L; Kayser, M; Bonfield, W; (2000) TEM examination of the interface between Bioglass (R)/polyethylene composites and human osteoblast cells in vitro. BIOCERAMICS , 192-1 649 - 652.

J

Jiang, X; Luo, KH; (2000) Direct numerical simulation of the puffing phenomenon of an axisymmetric thermal plume. Theoretical and Computational Fluid Dynamics , 14 (1) pp. 55-74. 10.1007/s001620050125.

Jiang, X; Luo, KH; (2000) Spatial direct numerical simulation of the large vortical structures in forced plumes. Flow, Turbulence and Combustion , 64 (1) pp. 43-69. 10.1023/A:1009950127478.

K

Kibria, SMG; Leveson, SH; Homer-Vanniasinkam, S; (2000) Spontaneous dissection of the abdominal aorta. J ROY COLL SURG EDIN , 45 (6) 408 - 410.

Konstantinidis, E; Castiglia, D; Balabani, S; Yianneskis, M; (2000) On the flow and vortex shedding characteristics of an in-line tube bundle in steady and pulsating crossflow. CHEM ENG RES DES , 78 (A8) 1129 - 1138.

Konstantinidis, E; Yianneskis, M; Balabani, S; (2000) Vortex lock-on phenomena due to pulsating flow in tube arrays. In: (Proceedings) 10th Int. Symposium on Applications of Laser Techniques to Fluid Mech.

L

Ladommatos, N; Abdelhalim, S; Zhao, H; (2000) The effects of exhaust gas recirculation on diesel combustion and emissions. International Journal of Engine Research , 1 (1) pp. 107-126. 10.1243/1468087001545290.

Ladommatos, N; Xiao, Z; Zhao, H; (2000) Effects of fuels with a low aromatic content on diesel engine exhaust emissions. P I MECH ENG D-J AUT , 214 (D7) 779 - 794.

Ladommatos, N; Zhao, H; Bryce, DJ; Xiao, Z; (2000) Fuel effects in soot formation and emissions. In: (Proceedings) 3rd Symposium towards clean diesel engines.. : Paris.

Lee, YS; Poynter, R; Podczeck, F; Newton, JM; (2000) Development of a dual approach to assess powder flow from avalanching behavior. AAPS PharmSciTech , 1 (3) E21-. 10.1208/pt010321.

Lee, YSL; Poynter, R; Podczeck, F; Newton, JM; (2000) Development of a dual approach to assess powder flow from avalancing behavior. AAPS PharmSciTech , 1 (3)

Li, L; Papadopoulos, DP; Smith, FT; Wu, GX; (2000) Water flow due to rapid analysis of nonlinear interactions between waves and bodies. In: (Proceedings) Proceedings of the IUTAM Symposium on Free-Surface Flows, Birmingham, UK, July.

Loh, PP; Bao, X; Nangrejo, MR; Edirisinghe, MJ; (2000) Coating with amorphous silicon carbide using polymeric precursors. J MATER SCI LETT , 19 (7) 587 - 589.

Lu, CH; He, YS; Wu, GX; (2000) Coupled Analysis of Nonlinear Interaction Between Fluid and Structure during Impact. Journal of Fluids and Structures , 14 (1) pp. 127-146. 10.1006/jfls.1999.0257.

Lunn, M; Bucknall, RWG; (2000) Fuel Cells. Journal of Naval Engineering , 39 (2)

M

Miodownik, M; Holm, EA; Hassold, GN; (2000) Highly parallel computer simulations of particle pinning: Zener vindicated. SCRIPTA MATERIALIA , 42 (12) pp. 1173-1177. 10.1016/S1359-6462(00)00354-7.

Miodownik, MA; Holm, EA; Browne, DJ; (2000) Modeling the effect of noise on multiscale dislocation cell structures. MULTISCALE PHENOMENA IN MATERIALS-EXPERIMENTS AND MODELING , 578 pp. 469-474.

N

Nangrejo, MR; Bao, X; Edirisinghe, MJ; (2000) The structure of ceramic foams produced using polymeric precursors. J MATER SCI LETT , 19 (9) 787 - 789.

Nangrejo, MR; Bao, XJ; Edirisinghe, MJ; (2000) Preparation of silicon carbide-silicon nitride composite foams from pre-ceramic polymers. J EUR CERAM SOC , 20 (11) 1777 - 1785.

Newton, JM; Haririan, I; Podczeck, F; (2000) The determination of the mechanical properties of elongated tablets of varying cross section. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS , 49 (1) pp. 59-64. 10.1016/S0939-6411(99)00065-X.

Newton, JM; Haririan, I; Podczeck, F; (2000) The influence of punch curvature on the mechanical properties of compacted powders. POWDER TECHNOLOGY , 107 (1-2) pp. 79-83. 10.1016/S0032-5910(99)00173-4.

Newton, JM; Podczeck, F; (2000) Letter to the editor (multiple letters) [1]. International Journal of Pharmaceutics , 198 (2) pp. 249-252. 10.1016/S0378-5173(00)00354-9.

Newton, JM; Podczeck, F; (2000) Untitled. INTERNATIONAL JOURNAL OF PHARMACEUTICS , 198 (2) pp. 249-250. 10.1016/S0378-5173(00)00354-9.

Newton, JM; Podczeck, F; (2000) The process of forming solid compacts by the application of pressure to a powder bed is not the preserve of pharmacy. Int J Pharm , 198 (2) pp. 249-252.

O

OSHIMA, M; TORII, R; TAKAGI, K; (2000) 脳動脈瘤の計算力学. BME : bio medical engineering , 14 (10) pp. 14-17.

OSHIMA, M; TORII, R; TAKAGI, K; (2000) コンピューテーショナル・バイオメカニクス  脳動脈りゅうの計算力学. BME , 14 (10) pp. 14-17.

Oakley, A; Zhao, H; Ladommatos, N; Ma, T; (2000) Experimental studies on Controlled Auto-ignition (CAI) combustion in a 4-stroke gasoline engine. In: INTERNATIONAL CONFERENCE ON 21ST CENTURY EMISSIONS TECHNOLOGY. (pp. 163 - 174). PROFESSIONAL ENGINEERING PUBLISHING LTD

P

PODCZECK, F; (2000) The shape of powder particles and its influence on powder handling. IFPRI: The Hague.

Patel, RC; Greig, AR; (2000) An object recognition system described as a hierarchical, multilevel system. In: (Proceedings) EUREL European Advanced Robotic Systems Master Class and Conference - Robotics 2000, Salford, UK, 12-14 April. (pp. pp. 1-8).

Peleties, P; Brennan, FP; (2000) Fatigue analysis of skewed T-joint welded plates. In: (Proceedings) Proc. 20th International Conference on Offshore Mechanics and Arctic Engineering, New Orleans, USA.

Podczeck, F; (2000) The development of an instrumented tamp-filling capsule machine I Instrumentation of a Bosch GKF 400S machine and feasibility study. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES , 10 (4) pp. 267-274. 10.1016/S0928-0987(00)00071-3.

Podczeck, F; Newton, JM; (2000) Powder and capsule filling properties of lubricated granulated cellulose powder. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS , 50 (3) pp. 373-377. 10.1016/S0939-6411(00)00100-4.

R

Ramanarayanan, B; Vivek Ross, S; Darvemula, U; Sujith, RI; Chakravarthy, SR; (2000) Development of an Acoustically Excited Solid Waste Incinerator-- Part I: Liquid Fuel Ramjet Analog. In: (Proceedings) 38th Aerospace Sciences Meeting & Exhibit. : Reno, NV, USA.

Rashid, H; Tay, BY; Edirisinghe, MJ; (2000) Dispersion of ceramic ink using an ultrasonic disruptor. J MATER SCI LETT , 19 (9) 799 - 801.

Rivas, S; Greig, AR; (2000) Motion control and monitoring for automated welding of tubular nodes. In: (Proceedings) EUREL European Advanced Robotic Systems Master Class and Conference - Robotics 2000, Salford, UK, 12-14 April. (pp. pp. 1-8).

Rivas, S; Greig, AR; Blackman, S; Bertaso, D; (2000) Automated burr grinding repair of welds for an underwater environment. In: (Proceedings) EUREL European Advanced Robotic Systems Master Class and Conference - Robotics 2000, Salford, UK, 12-14 April. (pp. pp. 1-8).

Rowlands, TE; Norfolk, D; Homer-Vanniasinkam, S; (2000) Chronic disseminated intravascular coagulopathy cured by abdominal aortic aneurysm repair. CARDIOVASC SURG , 8 (4) 292 - 294.

S

Saffari, N; Ong, CS; Moreau, B; (2000) Ultrasonic characterization of porous plasma-sprayed bioceramic coatings. In: Thompson, DO and Chimenti, DE, (eds.) REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 19A AND 19B. (pp. 1317 - 1323). AMER INST PHYSICS

Song, JH; Evans, JRG; Edirisinghe, MJ; Twizell, EH; (2000) Optimization of heating schedules in pyrolytic binder removal from ceramic moldings. J MATER RES , 15 (2) 449 - 457.

Sotiropoulos, F; Ventikos, Y; (2000) Coherent structures in the near-field of rectangular jets. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED , 251 pp. 169-173.

Sotiropoulos, F; Ventikos, Y; (2000) Three-dimensional steady vortex breakdown in laboratory models of confined swirling flows. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED , 251 pp. 163-168.

Stolkin, R; Hodgetts, M; Greig, A; (2000) An EM / E-MRF Strategy for Underwater Navigation. In: Mirmehdi, M and Thomas, BT, (eds.) (pp. pp. 1-10). British Machine Vision Association

T

TORII, R; OSHIMA, M; KOBAYASHI, T; TAKAGI, K; (2000) 4. Numerical Visualization of Blood Flow in the Cerebral Artery. Journal of visualization , 3 (3)

Tay, BY; Rashid, H; Edirisinghe, MJ; (2000) On the preparation of ceramic ink for continuous jet printing. J MATER SCI LETT , 19 (13) 1151 - 1154.

Tiow, WT; Zangeneh, M; (2000) A three-dimensional viscous transonic inverse design method. In:

Torii, R; Oshima, M; Kobayashi, T; Takagi, K; (2000) Numerical simulation system of blood flow-in the cerebral artery using CT image data. Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B , 66 (652) pp. 3041-3048. 10.1299/kikaib.66.652_3041.

V

VENTIKOS, Y; (2000) UNSPECIFIED Computers & Fluids , 29 pp. 63-88.

Ventikos, Y; (2000) Spatio-temporal aspects of chaotic stirring: Optimizing injection in the aperiodic wake of a blade. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED , 251 pp. 897-902.

Ventikos, Y; Tzabiras, G; (2000) A numerical method for the simulation of steady and unsteady cavitating flows. COMPUTERS & FLUIDS , 29 (1) pp. 63-88. 10.1016/S0045-7930(98)00061-9.

Vivek Ross, S; Rajesh, R; Ramanarayanan, B; Chakravarthy, SR; (2000) Quasi Steady Fluctuation of a lifted laminar Diffusion Flame: Hysteresis. In: (Proceedings) National Conference on Air Breathing Engines and Aerospace Propulsion. : Hyderabad, India.

W

Wojcik, AG; (2000) A method of improving adhesion to implants using UV light.

Wojcik, AG; Teo, TS; (2000) Trilobite hydrodynamics. In: (Proceedings) Martech 2000 International Conference, Singapore, 12-15 September.

Wu, GX; (2000) A note on non-linear hydrodynamic force on a floating body. Applied Ocean Research , 22 (5) pp. 315-316. 10.1016/S0141-1187(00)00016-X.

X

Xiao, Z; Ladommatos, N; Zhao, H; (2000) The effect of aromatic hydrocarbons and oxygenates on diesel engine emissions. P I MECH ENG D-J AUT , 214 (D3) 307 - 332.

Xiao, Z; Ladommatos, N; Zhao, H; (2000) The effect of aromatic hydrocarbons and oxygenates on diesel engine emissions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 214 (3) pp. 307-332. 10.1243/0954407001527448.

Y

Yiu, KFC; Zangeneh, M; (2000) Three-dimensional automatic optimization method for turbomachinery blade design. J PROPUL POWER , 16 (6) 1174 - 1181.

Z

Zangeneh, M; (2000) CENTRIFUGAL OR MIXED FLOW TURBOMACHINERY. DE 69420745 (T2).

Zangeneh, M; (2000) Turbomachinery and method of manufacturing the same. JP 2000515944 (A).

Zangeneh, M; Goto, A; Harada, H; (2000) Turbomachinery and method of manufacturing the same. US 6062819 (A).

Zeqiri, B; Davies, SC; Gelat, PN; Hodnett, M; Lula, UI; (2000) Novel sensors for monitoring acoustic cavitation. 2000 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1 AND 2 pp. 417-420.

Zhao, H; Hu, J; Ladommatos, N; (2000) In-cylinder studies of the effects of CO2 in exhaust gas recirculation on diesel combustion and emissions. P I MECH ENG D-J AUT , 214 (D4) 405 - 419.

Zhao, H; Williams, J; Damiano, L; Bryce, D; Ladommatos, N; Ma, T; (2000) Development of a specially designed optical engine and laser diagnostics for stratified charge and controlled auto-ignition combustion studies. In: INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL METHODS IN RECIPROCATING ENGINES. (pp. 151 - 165). PROFESSIONAL ENGINEERING PUBLISHING LTD

Zhao, H; Williams, J; Damiano, L; Ladommatos, N; (2000) Visualisation of in-cylinder flow and controlled auto-ignition combustion in an optical engine. In: (Proceedings) International Conference on Flow Visualisation.. : Edinburgh.

This list was generated on Sun Aug 18 06:28:05 2019 BST.