UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Browse by UCL Departments and Centres

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Author | Type
Jump to: B | C | G | H | J | L | M | N | P | S | V | W | Z
Number of items: 35.

B

BLANQUE, D; STERNAGEL, H; PODCZECK, F; NEWTON, JM; (1995) SOME FACTORS INFLUENCING THE FORMATION AND IN-VITRO DRUG-RELEASE FROM MATRIX PELLETS PREPARED BY EXTRUSION SPHERONIZATION. INT J PHARM , 119 (2) pp. 203-211.

BLAZDELL, PF; EVANS, JRG; EDIRISINGHE, MJ; SHAW, P; BINSTEAD, MJ; (1995) THE COMPUTER-AIDED MANUFACTURE OF CERAMICS USING MULTILAYER JET PRINTING. J MATER SCI LETT , 14 (22) 1562 - 1565.

Bailey, JJ; Bucknall, R; Haines, NA; (1995) Design and development of a single-phase six-pulse cycloconverter for induction motor control. Proceedings of the Universities Power Engineering Conference , 1 pp. 17-20.

Bucknall, RWG; Juby, L; Jackson, MB; Haines, NA; (1995) Experimental investigations into the performance of cycloconverter propulsion systems employing tandem ac ac generators. In: IMarE Electric Propulsion the effective solution? IMarE

C

Chen, A; Lee, KC; Yianneskis, M; Ganti, G; (1995) Velocity characteristics of steady flow through a straight generic inlet port. International Journal for Numerical Methods in Fluids , 21 (7) pp. 571-590. 10.1002/fld.1650210704.

Craig, DQM; Sutananta, W; Newton, JM; (1995) An investigation into synergistic gel formationby xamthan gum and locust bean gum. Presented at: 22nd International Symposium on Controlled Release of Bioactive Materials, Seattle, USA.

Craig, DQM; Sutananta, W; Newton, JM; (1995) An investigation into the structure of pharmaceutical glycerides using dielectric spectroscopy. Proceedings of the Controlled Release Society (22) pp. 392-393.

G

Golnaraghi, MF; Lin, DC; Fromme, P; (1995) Gear damage detection using chaotic dynamics techniques: a preliminary study. Presented at: UNSPECIFIED.

H

Hu, Z; Ladommatos, N; (1995) In-cylinder catalysts - A novel approach to reduce hydrocarbon emissions from spark-ignition engines. SAE Technical Papers 10.4271/952419.

Huang, J; Wang, M; Rehman, I; Knowles, J; Bonfield, W; (1995) Analysis of surface structures on Bioglass®/polyethylene composites in vitro. Presented at: The 8th International Symposium on Ceramics in Medicine.

J

Jerwanska, E; Alderborn, G; Newton, JM; Nyström, C; (1995) The effect of water content on the porosity and liquid saturation of extruded cylinders. International Journal of Pharmaceutics , 121 (1) pp. 65-71. 10.1016/0378-5173(95)00007-6.

Juby, L; Bucknall, R; Haines, NA; (1995) Harmonic reduction technique for cycloconverter propulsion drives. IEE Conference Publication (412) pp. 333-337.

Juby, L; Bucknall, RWG; Haines, NA; (1995) A harmonic reduction technique for cycloconverter propulsion drives. In: IEE 7th International Conference on Electrical Machines and Drives. IEE

L

Lai, SMH; Podczeck, F; Newton, JM; Daumesnil, R; (1995) An expert system fro the development of powder filled hard gelatin capsule formulations. Presented at: AAPS, Maiami, Florida, USA.

Luo, KH; Sandham, ND; (1995) Acoustic wave and shear layer structure in Mach 3 compressible round jet. In: (Proceedings) Tenth Symposium on Turbulent Shear Flows. (pp. 25 - 30).

Luo, KH; Sandham, ND; (1995) Direct simulation of scalar mixing in a compressible shear layer. In: Benzi, R, (ed.) Fluid Mechanics and its Applications: Advances in Turbulence V. (340 - 345). Kluwer Academic Publishers: Dordrecht.

Lustig, C; Podczeck, F; Newton, JM; (1995) The influence of the properties of drug on the preparation of spherical pellets by extrision/spheronisation. Presented at: 1st World Meeting on Pharmaceutics, Biopharmaceutocs and Pharmaceutical Technology, Budapest.

M

MATAR, SA; EDIRISINGHE, MJ; EVANS, JRG; TWIZELL, EH; SONG, JH; (1995) MODELING THE REMOVAL OF ORGANIC VEHICLE FROM CERAMIC OR METAL MOLDINGS - THE EFFECT OF GAS PERMEATION ON THE INCIDENCE OF DEFECTS. J MATER SCI , 30 (15) 3805 - 3810.

MATAR, SA; EVANS, JRG; EDIRISINGHE, MJ; TWIZELL, EH; (1995) THE INFLUENCE OF MONOMER AND POLYMER PROPERTIES ON THE REMOVAL OF ORGANIC VEHICLE FROM CERAMIC AND METAL MOLDINGS. J MATER RES , 10 (8) 2060 - 2072.

MIODOWNIK, M; HUMPHREYS, A; MARTIN, J; (1995) GROWTH OF SECONDARY RECRYSTALLIZED GRAINS DURING ZONE ANNEALING OF OXIDE DISPERSION-STRENGTHENED ALLOYS. MATERIALS SCIENCE AND TECHNOLOGY , 11 (5) pp. 450-453.

Mitchell, CL; Newton, JM; Evans, DF; Short, MB; Bye, A; (1995) The Influence of dimensions on the gastric emptyiing of tablets in fasted and fed volunteers. Presented at: 1St World Meeting on Pharmaceutics, Biopahrmaceutics and Pharmaceutical Technology, Budapest,Hungary.

N

Newton, JM; Chapman, SR; Rowe, RC; (1995) The assessment of the scale-up performance of the extrusion/spheronisation process. International Journal of Pharmaceutics , 120 (1) pp. 95-99. 10.1016/0378-5173(94)00425-5.

P

PODCZECK, F; NEWTON, JM; (1995) THE EVALUATION OF A 3-DIMENSIONAL SHAPE FACTOR FOR THE QUANTITATIVE ASSESSMENT OF THE SPHERICITY AND SURFACE-ROUGHNESS OF PELLETS. INT J PHARM , 124 (2) pp. 253-259.

Pinto, W.T.; (1995) On the dynamics of low tension marine cables. Doctoral thesis, University of London. Green open access
file

Podczeck, F; Chopra, R; Newton, JM; (1995) The use of two a and three-dimensional spahe factor to characterize the sphericity of pellets. Presented at: 1st World Meeting on Pharmaceutics, Biopharmaceutics and Pharmceutical Technology, Budapest, Hungary.

Podczeck, F; Newton, JM; James, MB; (1995) The adhesion strength of salmeterol and a series of salmeterol salts to compacted lactose monohydrate surfaces. Presented at: 1st International Congress on Adhesion Science and Technology, Amsterdam, Holland.

Podczeck, F; Newton, JM; James, MB; (1995) The influence of physical properties of the materials in contact on the adhesion strength of particles of salmeterol salts to various surface materials. Presented at: 1st International Congress on AdhesionScience and Technology, Amsterdam, Holland.

S

Spooner, E; Bucknall, RWG; Haines, NA; (1995) Slotless-armature DC drives for surface warship propulsion. In: IEE 7th International Conference on Electrical Machines and Drives. IEE: Durham.

Spooner, E; Haines, N; Bucknall, R; (1995) Slotless-armature DC drives for surface warship propulsion. IEE Conference Publication (412) pp. 107-110.

V

Venthoye, G; Taylor, KMG; Newton, JM; Johmson, MCR; (1995) Use of the mark II cascade impactor at two operational flow rates to assess drug only dry powder inhaler formulation. Presented at: Drug Delevery to the Lung VI, London.

Venthoye, G; Taylor, KMG; Newton, JM; Johmson, MCR; (1995) The application of three different impactor methods to study variations in samples of micronised and spray dried salbutamol sulphate. Presented at: LDrug Delivery to theLung VI.

Venthoye, G; Taylor, KMG; Newton, JM; Johnson, MCR; (1995) The use of two inertial impaction methods to determine the effect of size fractions of lactose on the fine particle dose delivered from mixtures with salbutamol sulphate. Presented at: Drug Delivery to the Lung VI, London.

W

Wu, GX; (1995) Radiation and Diffraction by a Submerged Sphere Advancing in Water Waves of Finite Depth. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences , 448 (1932) pp. 29-54. 10.1098/rspa.1995.0002.

Wu, GX; (1995) The interaction of water waves with a group of submerged spheres. Applied Ocean Research , 17 (3) pp. 165-184. 10.1016/0141-1187(95)00010-0.

Z

Zangeneh, M; Harada, H; Goto, A; (1995) CENTRIFUGAL OR MIXED FLOW TURBOMACHINERY. CA 2192327 (A1).

This list was generated on Sun Nov 27 06:00:45 2016 GMT.