UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Browse by UCL Departments and Centres

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Author | Type
Jump to: B | C | H | J | L | M | N | O | P | S | T | V | W | Z
Number of items: 31.

B

Brown, DR; Newton, JM; Timmins, P; (1993) An unusual mode of fracture exhibited by Acicel PH102 compacts when subjected to diametral compression (DC). Presented at: AAPS.

Brown, DR; Warburton, B; Newton, JM; Timmins, P; (1993) An electrical circuit to improve the reproducibility of compacts prepared on an Instron physical testing instruement. Presented at: British Pharmaceutical Conferemce.

C

Chawla, A; Buckton, G; Taylor, KMG; Newton, JM; Johnson, MCR; (1993) Surface energy determoinations of powders for use in dry powder aerosol formulations. Presented at: Britsh Pharmaceutical Conferemnce.

Clarke, GM; Newton, JM; Short, MD; (1993) Gastrointestinal transit of pellets of differing size and density. International Journal of Pharmaceutics , 100 (1-3) pp. 81-92. 10.1016/0378-5173(93)90078-T.

Crinnion, JN; Homer-Vanniasinkam, S; Gough, MJ; (1993) Skeletal muscle reperfusion injury: pathophysiology and clinical considerations. Cardiovasc Surg , 1 (4) pp. 317-324.

H

Homer-Vanniasinkam, S; Hardy, SC; Gough, MJ; (1993) Reversal of the post-ischaemic changes in skeletal muscle blood flow and viability by a novel inhibitor of lipid peroxidation. Eur J Vasc Surg , 7 (1) pp. 41-45.

J

Jones, GR; Laughton, MA; Say, MG; Bucknall, RWG; (1993) Electrical engineer's reference book. Newnes

L

Ladommatos, N; (1993) Mechanisms of heat transfer to liquid films in the manifold of port-injected petrol engines. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 207 (3) pp. 211-222.

Ladommatos, N; Parsi, M; McGrath, N; Mayne, S; (1993) Analysis of combustion in the cetane-rating engine using high-speed photography. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 207 (4) pp. 317-328.

Lam, KK; Newton, JM; (1993) The influence of the time of application of contact pressure onparticle adhesion to a substrate surface. Powder Technology , 76 (2) pp. 149-154. 10.1016/S0032-5910(05)80022-1.

M

MATAR, SA; EDIRISINGHE, MJ; EVANS, JRG; TWIZELL, EH; (1993) THE EFFECT OF POROSITY DEVELOPMENT ON THE REMOVAL OF ORGANIC VEHICLE FROM CERAMIC OR METAL MOLDINGS. J MATER RES , 8 (3) 617 - 625.

MIODOWNIK, M; (1993) INDUSTRY ON TRIAL. NEW SCIENTIST , 138 (1869) 48 - 48.

MIODOWNIK, M; MARTIN, J; LITTLE, E; (1993) GRAIN-BOUNDARY SEGREGATION IN AN OXIDE-DISPERSION-STRENGTHENED FERRITIC STEEL. JOURNAL OF MATERIALS SCIENCE LETTERS , 12 (11) pp. 834-835. 10.1007/BF00277989.

Mendis, KJS; Stone, CR; Ladommatos, N; Weller, G; (1993) Modelling and measurements from a natural gas fuelled engine. SAE Technical Papers 10.4271/930927.

Milojevic, S; Newton, JM; Cummings, JH; Gibson, G; Botham, RL; Ring, SG; Allwood, M; (1993) The in viro and in vivo evaluation of amylose coated pellets for colon spacific drug delivery. Presented at: 20the International Symposium of Controlled Release of Bioactive Materials.

N

NOGUEIRA, REFQ; EDIRISINGHE, MJ; GAWNE, DT; (1993) FABRICATION OF ENGINEERING CERAMICS BY INJECTION-MOLDING A SUSPENSION WITH OPTIMUM POWDER PROPERTIES .1. PROCESSING AND MICROSTRUCTURE. J MATER SCI , 28 (15) 4167 - 4174.

Newton, JM; Alderborn, G; Nystrom, C; Stanley, P; (1993) The compressive to tensile strength ratio of pharmaceutical compacts. International Journal of Pharmaceutics , 93 (1-3) pp. 249-251. 10.1016/0378-5173(93)90185-I.

O

Odidi, IO; Newton, JM; (1993) Cylindrical tube and surface tension viscous flow models in the assessment of capillary flow and liquid contact angles in pharmaceutical powders. International Journal of Pharmaceutics , 90 (3) pp. 203-211. 10.1016/0378-5173(93)90192-I.

P

PODCZECK, F; (1993) Evaluation of the properties of microcrystalline and microfine cellulose powders. Int. J. Pharm. , 91 (2) pp. 183-193. 10.1016/0378-5173(93)90338-G.

S

SHAW, HM; EDIRISINGHE, MJ; (1993) REMOVAL OF BINDER FROM CERAMIC BODIES FABRICATED USING PLASTIC FORMING METHODS. AM CERAM SOC BULL , 72 (9) 94 - 99.

STONE, CR; GOULD, J; LADOMMATOS, N; (1993) ANALYSIS OF BIO-GAS COMBUSTION IN SPARK-IGNITION ENGINES, BY MEANS OF EXPERIMENTAL-DATA AND A COMPUTER-SIMULATION. J I ENERGY , 66 (469) 180 - 187.

Sawh, DG; Craig, DQM; Newton, JM; Williams, AC; Johnson, MCR; (1993) An investigation into the effect of drying on a commercial magnesium stearate powder using differential calorimitry (DSC) and Raman spectroscopy. Presented at: Pharmaceutical Society of Great Britain.

Sawh, DG; Craig, DQM; Newton, JM; Williams, AC; Johnson, MRC; (1993) The effect of moisture on a commercial magnesium stearate powder using differential scanning calorimtry (DSC) and raman spectroscopy. Presented at: AAPS.

Sutananta, W; Craig, DQM; Newton, JM; (1993) The effecy of ageing and storage conditions on the structure and properties of Gelucire 55/18. Presented at: AAPS.

Sutananta, W; Draig, DQM; Newton, JM; (1993) An investigation into the structure and stability of Gelucire 43/01 using differential scanning caloimirty and optical microscope. Presented at: British Pharmaceutacal Society Conference.

T

Tapia, C; Buckton, G; Newton, JM; (1993) Factors influencing the mechanism of release from sustained release matrix pellets, produced by extrusion/spheronisation. International Journal of Pharmaceutics , 92 (1-3) pp. 211-218. 10.1016/0378-5173(93)90282-K.

V

Vazquez, B; Yianneskis, M; (1993) Natural and forced convection in an auditorium. Building Services Engineering Research and Technology , 14 (4) pp. 169-178. 10.1177/014362449301400408.

W

Wu, GX; (1993) Hydrodynamic forces on a submerged circular cylinder undergoing large-amplitude motion. Journal of Fluid Mechanics , 254 (-1) p. 41. 10.1017/S0022112093002022.

Wu, GX; (1993) Second-order wave radiation by a submerged horizontal circular cylinder. Applied Ocean Research , 15 (5) pp. 293-303. 10.1016/0141-1187(93)90018-S.

Wu, GX; (1993) A relation between wave reflection and transmission by a submerged body at forward speed. Applied Ocean Research , 15 (5) pp. 311-313. 10.1016/0141-1187(93)90020-X.

Z

Zangeneh, M; (1993) Inviscid-viscous interaction method for 3D inverse design of centrifugal impellers. In:

This list was generated on Sun Sep 25 08:35:46 2016 BST.