UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Mechanical properties of injection moulding suspensions as a function of ceramic volume fraction and temperature

Zhang, T; Evans, JRG; (1991) Mechanical properties of injection moulding suspensions as a function of ceramic volume fraction and temperature. Journal of the European Ceramic Society , 7 (3) pp. 155-163. 10.1016/0955-2219(91)90033-V.

Full text not available from this repository.

Abstract

The elastic modulus of ceramic injection moulding compositions with ceramic volume fractions from 0 to 0·56 were measured in the temperature range from 20°C to the softening point of 144°C. The uniaxial fracture strength of the most concentrated suspension was measured in the same temperature range. Poisson's ratio was obtained by a train gauge method in which the electrical heating effect of the gauge was controlled. The results are compared with model predictions in order that such data can be obtained for diverse suspensions from a minimum of measurements. Such results are necessary for the analysis of residual stress and hence cracking during the solidification stage of ceramic injection moulding. © 1991.

Type: Article
Title: Mechanical properties of injection moulding suspensions as a function of ceramic volume fraction and temperature
DOI: 10.1016/0955-2219(91)90033-V
UCL classification: UCL > School of BEAMS
UCL > School of BEAMS > Faculty of Maths and Physical Sciences
URI: http://discovery.ucl.ac.uk/id/eprint/730846
Downloads since deposit
0Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item