UCL Discovery
UCL home » Library Services » Electronic resources » UCL Discovery

High power visible light emitting diodes as pulsed excitation sources for biomedical photoacoustics

Allen, TJ; Beard, PC; (2016) High power visible light emitting diodes as pulsed excitation sources for biomedical photoacoustics. Biomedical Optics Express , 7 (4) pp. 1260-1270. 10.1364/BOE.7.001260. Green open access

[thumbnail of High power visible light emitting diodes as pulsed excitation sources for biomedical photoacoustics.pdf]
Preview
Text
High power visible light emitting diodes as pulsed excitation sources for biomedical photoacoustics.pdf - Published Version

Download (2MB) | Preview

Abstract

The use of visible light emitting diodes (LEDs) as an alternative to Q-switched lasers conventionally used as photoacoustic excitation sources has been explored. In common with laser diodes, LEDs offer the advantages of compact size, low cost and high efficiency. However, laser diodes suitable for pulsed photoacoustic generation are typically available only at wavelengths greater than 750nm. By contrast, LEDs are readily available at visible wavelengths below 650nm where haemoglobin absorption is significantly higher, offering the prospect of increased SNR for superficial vascular imaging applications. To demonstrate feasibility, a range of low cost commercially available LEDs operating in the 420-620nm spectral range were used to generate photoacoustic signals in physiologically realistic vascular phantoms. Overdriving with 200ns pulses and operating at a low duty cycle enabled pulse energies up to 10µJ to be obtained with a 620nm LED. By operating at a high pulse repetition frequency (PRF) in order to rapidly signal average over many acquisitions, this pulse energy was sufficient to generate detectable signals in a blood filled tube immersed in an Intralipid suspension (µs' = 1mm(-1)) at a depth of 15mm using widefield illumination. In addition, a compact four-wavelength LED (460nm, 530nm, 590nm, 620nm) in conjunction with a coded excitation scheme was used to illustrate rapid multiwavelength signal acquisition for spectroscopic applications. This study demonstrates that LEDs could find application as inexpensive and compact multiwavelength photoacoustic excitation sources for imaging superficial vascular anatomy. Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

Type: Article
Title: High power visible light emitting diodes as pulsed excitation sources for biomedical photoacoustics
Location: United States
Open access status: An open access version is available from UCL Discovery
DOI: 10.1364/BOE.7.001260
Publisher version: http://dx.doi.org/10.1364/BOE.7.001260
Language: English
Additional information: Published by The Optical Society under the terms of the Creative Commons Attribution 4.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.
Keywords: (110.5120) Photoacoustic imaging, (170.3880) Medical and biological imaging
UCL classification: UCL
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Med Phys and Biomedical Eng
URI: https://discovery.ucl.ac.uk/id/eprint/1481173
Downloads since deposit
122Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item