Khan, M.I.; (2004) The influence of two-dimensional bed roughness on the flow structure of a turbulent boundary layer. Doctoral thesis , University of London.

Text U602846.pdf Download (17MB)

Abstract

Experiments have been performed to investigate the relationship between the geometry of an idealised bed roughness and the structure of the turbulent boundary layer above. This work has particular applications in relation to architecture and environmental health, designing comfort for pedestrians and managing environmental pollution. Experiments were carried out in a laboratory water flume to study the turbulence structure generated under both rough and smooth bed conditions. The relationship between small scale turbulent eddies formed between the elements of a two-dimensional bed roughness and the intermittent turbulent structure of the boundary layer was established in the form of roughness length scale and friction velocity using LDV measurements from the mean velocity profile. Turbulence production was also determined from measurements of the Reynolds stress and velocity gradient. This was compared with the diffusion characteristics of the flow. Spacing between the roughness slats was varied for different tests to produce isolated (k-type) bed roughness, skimming (d-type) flow, and wake interference flow for transitional roughness. Transition between these regimes was further investigated using flow visualisation, and a clear correlation established between the vortices at the bed and the turbulence characteristics of the boundary layer. The effect of sudden changes in bed geometry on the turbulence structure was investigated for flows aligned perpendicular to the roughness elements forming simulated urban environment. These results were compared for a similar model street canyon with and without a large scale upstream approach roughness. The turbulence generated as a result of the change in local bed geometry has a significant influence on the dispersion of dye tracer used to simulate pollutant. It was found that uniformity in height of buildings along parallel streets in an urban environment promotes shear at roof-level, thereby trapping fluid and pollution within the canyon. On the other hand, non-uniformity in building height and the presence of substantial upstream buildings promotes turbulence which helps in ventilation of street canyons.

Download activity - last month

Export as CSVXMLJSON

Download activity - last 12 months

Export as JSONCSVXML

Downloads by country - last 12 months

Export as CSVXMLJSON

Archive Staff Only

View Item