Chung, H; Ku, B; Gregory, J; (2008) Development of an advanced water treatment system for wastewater reuse. ENVIRON TECHNOL , 29 (9) 931 - 939.
Full text not available from this repository.
The aim of this research was to develop an optimal reuse system applying various types of advanced oxidation processes such as titanium dioxide (TiO2). Zone (O-3) and electro-coagulation/oxidation methods. This system is suitable for improving the treatment efficiency of difficult wastewaters, and for the efficient reuse of wastewater. The connecting systems were divided into various types to investigate the stability and treatment efficiency according to the kinds of waste load. Different treatment sequences were examined taking into consideration the characteristics and economical efficiency. In the case of electro-coagulation/oxidation + ozone system, the mean treatment efficiency in terms of BOD5, CODCr, and SS removal was 98.7%. The effluent concentration was 50.2 mg l(-1), 38.3 mg l(-1), 30.4 mg l(-1), respectively. In considering the economical efficiency and commercial use, around an eighth of the treatment expenses and around a fifth of the maintenance expenses Could be saved compared with existing water treatment systems. The initial construction expenses could be reduced by a third to a fifth. Therefore, if a proper implementation of this research is carried out in relation to site conditions and the purpose of the water reuse, the water reuse rate will be higher and water resources can be protected.
|Title:||Development of an advanced water treatment system for wastewater reuse|
|Keywords:||AOP, TiO2, O-3, electro-coagulation/oxidation, wastewater treatment, ELECTRODE|
|UCL classification:||UCL > School of BEAMS > Faculty of Engineering Science > Civil, Environmental and Geomatic Engineering|
Archive Staff Only: edit this record