Wang, DZ and Edirisinghe, MJ and Jayasinghe, SN (2006) Solid freeform fabrication of thin-walled ceramic structures using an electrohydrodynamic jet. J AM CERAM SOC , 89 (5) 1727 - 1729. 10.1111/j.1551-2916.2006.00936.x.
Full text not available from this repository.
Abstract
A printing device, which operates on an electrohydrodynamic principle, was used to deposit 100 layers of a 10 vol% zirconia suspension. Thus, a wall similar to 100 mu m in thickness was freeformed. The wall thickness achieved in this work is almost 30% less than that of similar structures built by ink-jet printing and therefore we demonstrate a novel print deposition based solid freeform fabrication method, which can be developed further for preparing fine ceramic structures.
| Type: | Article |
|---|---|
| Title: | Solid freeform fabrication of thin-walled ceramic structures using an electrohydrodynamic jet |
| DOI: | 10.1111/j.1551-2916.2006.00936.x |
| Keywords: | ELECTROSTATIC ATOMIZATION, SUSPENSION, PRINTER |
| UCL classification: | UCL > School of BEAMS > Faculty of Engineering Science > Mechanical Engineering |
Archive Staff Only: edit this record