UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

SHRINKAGE DURING REMOVAL OF ORGANIC VEHICLE FROM INJECTION MOLDED ALUMINUM BODIES

PINWILL, IE; EDIRISINGHE, MJ; BEVIS, MJ; (1992) SHRINKAGE DURING REMOVAL OF ORGANIC VEHICLE FROM INJECTION MOLDED ALUMINUM BODIES. POWDER METALL , 35 (2) 113 - 116.

Full text not available from this repository.

Abstract

A Polypropylene based organic vehicle was used to injection mould commercial Purity aluminium powder. The test bars produced were heated, according to near optimum temperature-time schedules, in both static air and flowing nitrogen to remove the organic vehicle. Heating was interrupted at different temperatures to measure shrinkage and strength of the test bars. Shrinkage caused by the removal of organic vehicle increases the volume percentage of aluminium in the test bars and this results in an increase in their strength but the packing efficiency attained is well below the maximum value.

Type: Article
Title: SHRINKAGE DURING REMOVAL OF ORGANIC VEHICLE FROM INJECTION MOLDED ALUMINUM BODIES
Keywords: RHEOLOGY, FORMULATIONS, SUSPENSIONS, MOLDINGS
UCL classification: UCL > Provost and Vice Provost Offices
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Mechanical Engineering
URI: http://discovery.ucl.ac.uk/id/eprint/105948
Downloads since deposit
0Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item