FABRICATION OF ENGINEERING CERAMICS BY INJECTION-MOLDING A SUSPENSION WITH OPTIMUM POWDER PROPERTIES .2. MECHANICAL-PROPERTIES AND WEAR BEHAVIOR.
J MATER SCI
4821 - 4828.
The mechanical properties of alumina test bars fabricated using injection moulding as the shaping operation, are described. The modulus of rupture, hardness, fracture toughness and wear behaviour of the ceramic specimens are reported. Test bars were injection moulded using a polypropylene-based high molecular weight organic vehicle. The processing and microstructure of the test bars were discussed in Part I. The alumina powder was selected in a previous investigation, which considered the compounding, compression moulding, removal of organic vehicle and sintering of several formulations containing different alumina powders.
|Title:||FABRICATION OF ENGINEERING CERAMICS BY INJECTION-MOLDING A SUSPENSION WITH OPTIMUM POWDER PROPERTIES .2. MECHANICAL-PROPERTIES AND WEAR BEHAVIOR|
|Keywords:||INDENTATION TOUGHNESS EQUATIONS, FRACTURE-TOUGHNESS, WEIBULL MODULUS, ALUMINA, STRENGTH|
|UCL classification:||UCL > School of BEAMS
UCL > School of BEAMS > Faculty of Engineering Science
Archive Staff Only