UCL logo

UCL Discovery

UCL home » Library Services » Electronic resources » UCL Discovery

Influence of carbon number of C1–C7 hydrocarbons on PAH formation

Dandajeh, HA; Ladommatos, N; Hellier, P; Eveleigh, A; (2018) Influence of carbon number of C1–C7 hydrocarbons on PAH formation. Fuel , 228 pp. 140-151. 10.1016/j.fuel.2018.04.133. Green open access

[img]
Preview
Text
1-s2.0-S0016236118307750-main.pdf - ["content_typename_Published version" not defined]

Download (2MB) | Preview

Abstract

The influence of carbon number of seven hydrocarbons (methane, ethane, propane, n-butane, i-butane, heptane and toluene) on PAH formation was investigated in a laminar tube reactor. The hydrocarbons underwent oxygen-free pyrolysis within the temperature range of 1050–1350 °C at a fixed carbon concentration of 10,000 ppm on C 1 basis. Particulate and gas phase PAHs were collected at the outlet of the reactor at pyrolysis temperature intervals of 100 °C. The particulates generated were characterised at sub-micron levels in terms of size, number and mass using a differential mobility spectrometer (DMS-500). PAHs from both the gas and particulate samples were extracted using an accelerated solvent extractor (ASE) and the extracts analysed using gas chromatography coupled to mass spectrometry (GCMS). The PAHs studied were the US EPA 16 priority PAHs with particular attention given to group B2, which are possible human carcinogens. The experimental results showed that increase in temperature of the reactor from 1050 to 1350 °C decreased the total PAH concentrations regardless of the carbon number of the hydrocarbon investigated. Increasing the carbon number of C 1 –C 7 hydrocarbons decreased the gas phase (GP) PAH concentrations at a temperature of 1350 °C, while the particulate phase (PP) PAH concentrations (as well as those of Group B2 PAHs) decreased at a temperature of 1150 °C. There was increasing and decreasing trends of total PAH concentrations with increasing carbon number of the hydrocarbons at temperatures of 1050 °C and 1350 °C respectively. Benzenoid and five-membered ring PAHs of 2–4 rings were detected in roughly similar concentrations irrespective of the carbon number of the hydrocarbon. Soot propensities, abundance of particle phase PAHs and carcinogenicity of soot particles increased substantially at a temperature of 1050 °C due to isomerisation in the case of the C 4 hydrocarbons and aromatisation in the case of C 7 hydrocarbons. PAHs from toluene and propane had the highest weighted carcinogenicities at a temperature of 1050 °C per unit volume of gas and per unit soot mass respectively. The weighted carcinogenicity (soot mass basis) decreased with increasing carbon number at temperature of 1150 °C. Potential implication of these observations is that hydrocarbons known to produce substantial particulate mass in combustion systems such as an internal combustion engines, could also have low toxicity.

Type: Article
Title: Influence of carbon number of C1–C7 hydrocarbons on PAH formation
Open access status: An open access version is available from UCL Discovery
DOI: 10.1016/j.fuel.2018.04.133
Publisher version: https://doi.org/10.1016/j.fuel.2018.04.133
Language: English
Additional information: Crown Copyright © 2018 Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/BY/4.0/).
Keywords: PAHs, Particulates, Carbon number, Hydrocarbons, Pyrolysis
UCL classification: UCL > Provost and Vice Provost Offices
UCL > Provost and Vice Provost Offices > UCL BEAMS
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science
UCL > Provost and Vice Provost Offices > UCL BEAMS > Faculty of Engineering Science > Dept of Mechanical Engineering
URI: http://discovery.ucl.ac.uk/id/eprint/10048780
Downloads since deposit
45Downloads
Download activity - last month
Download activity - last 12 months
Downloads by country - last 12 months

Archive Staff Only

View Item View Item